China Self-Priming Pump

Wavelens LS-SB Brass pump is with features as follows:

Durable brass construction

High performance motors for maximum flow

Self-priming to insure proper filtration

Closed impeller for longer motor bearing life

Heat-resistant seal

Available in three-phase, 50HZ model

Power Order NO.:

5HP LS-TB050

7. 5HP LS-TB075

10HP LS-TB100

15HP LS-TB150

elf-priming jet pumps are suitable to pump clean water and non-aggressive chemical fluids, even with liquid mixed with gas. They are suitable for water lifting and distribution in domestic applications by small and medium sized tanks.

The pumps are reliable, safe and simple to use.

Standard data and equipment

Pump body: cast iron

Motor support: cast iron

Impeller: brass (noryl if required)

Shaft with rotor: superior steel

Mechanical seal: carbon/ceramic

Working conditions:

Max. temperature of fluid up to 40degree centigrade

Max. pressure 8bar

Max. ambient temperature up to 40degree centigrade

CDP TWIN IMPELLER SELF-PRIMING PUMPS

Operating conditions:

1. Max. Working pressure 10 bar

2. Liquid temperature up to 40° C

3. Ambient temperature up to 40° C

4. Continuous duty

Motor

1. Two-Pole induction motor(n=2900r. P. M. )

2. Insulation Class B/F

3. Protection IP44

Material

1. Pump body: Cast Iron

2. Motor Support: Cast Iron

3. Impeller: Brass

4. Diffuser: Noryl

5. Shaft with rotor: Hi-Cr plated 45# Steel/Stainless Steel

6. Mechanical seal: Metailzed Carbon/Ceramic Steatite

Application:

* Self-priming twin impeller water pumps with ejector for suction up to 8-9m.

* A suction up to 35mt. Depth can be allowed by taking the ejector down and connectiong it to the pump by means of a double hose and a foot valve.

* Suitable for civil and industrial purposes and to drain clean and soda water and non-aggressive liquids.

These self priming Jet pumps are suitable for pumping clean water and fluids which are not chemically aggressive to pump components. They are extremely reliable, economical and simple to use, being particularly suitable for domestic applications such as the automatic distribution of water from small and medium-size tanks, watering gardens, etc.

These pumps should be installed in a covered area, protected against the weather.

The series ZX pumps are newly developed self-priming centrifugal pumps for clean water or chemicals. The pumps have the compact structure, the high energy-efficiency to operate smoothly and reliably, the long life expectancy.

It is just need to check the amount of liquid in the pump for self-priming before starting pump. The self-priming centrifugal pumps are widely used for applications in the chemical, dye stuffs, petroleum, pharmaceutical, brewery, paper and pulp, metallurgical and mining industries and for oil discharge of oil carrying ships, as well as for water supply and sewage drainage of municipal industrial and emergence services.

This is a portable pump with strong suction and medium head loss, equipped with extraordinary hair collector; the body is made of thermal plastic of strengthening fiberglass with good corrosive and impact resistance; and with the advantages of high flow, quiet.

The JET-S series pumps are with a stainless steel pump body and excellent PC plastic for injector, special reliable mechanical seals, aluminum motor body. These pumps are suitable for clean water and chemically non-aggressive liquid. They are very reliable, safe and simple to use.

Flow rate up to 60 l/min (3.6m3/h)

Dynamic head up to 45m

ZCQ-driven self-absorption - magnetic pump (hereinafter referred to the pump), the static seal to replace the pump seal. The flow at the pump components completely sealed and completely solved the other pump mechanical seal failed to prevent run, run, drip, defects of the left, pump components and the flow of materials used in the corrosion-resistant stainless steel-ceramics, tetrafluoroethylene graphite materials, both CQ magnetic drive pump function, is obtained from a gully in his hand. End and we need irrigation valve, 4 meters high self-absorption. The pump features compact structure, pleasing in appearance, size, low noise, reliable, easy to maintain and repair use, which can be widely used in petroleum, chemical industry, Pharm - heavy liquid, venom, volatile liquid, as well as equipment for water recycling, particularly susceptible to leakage, flammable pumping liquid explosive. ZCQ models significance cases: 32-25-145 ZCQ driving force: Self-priming pump 32: 25: Pump outlet diameter pump impeller diameter diameter 145.

JET. JSP. JCP, series pump is a jet pump or a full lift self-priming pump which is consisted of centrifugal pump and jet nozzle.

These series pumps possess certain flow quantity, higher head. It could lift the water to 9 meters of vacuum height. This series is suitable for using on water withdraw of household, water supply of high building, irrigation of garden and farm, etc.

Applications and Features:

JET cast iron self-priming pumps combine the functional advantages of centrifugal pumps with the practical advantages of self-priming ones. With easy for assembling and using, compact construction, small and easy for moving, high efficiency, saving energy, no channel water before using etc. features, it is widely used in industrial and mining enterprise, high building, washing, garden irrigation and fountains etc.

Operating Conditions:

1.Type of liquid:clean water with no suspended solids or abrasive material

2.Maximum liquid temperature<=50&ordm;C.

3.Maximum suction height<=10m

4.Maximum working pressure<=10bar