China Satellite - Page 5

Internet connection to realize CA datas share

Internet CA support VIACCESS/ SECA/ IRDETO/ NAGRAVISION/ ALPHACRYPT/ BETARCYPT/ CONAX/ CRYPTOWORKS/ NDS/ POWERVU/ SKYCRYPT/ FIRECRYPT/ FIRECRYPT/ XCRYPT/ IRDETO/ BETACRYPT

Fully DVB-S/MPEIICompliant

Fashionable and small size front panel

Support the CA Function System

DisEqC1.0 and DisEqC1.2 Switching Support

More than 5000 Channel Memory Space

Multi-language OSD supported

Easy and fast software upgrade through RS-232 port

S/F DIF digital audio output (Optical optional)

Small windows screen picture with EPG graphic menu

4 digital LED display

Parental Lock function

LNB power overloads protection function

Model Name: Satellite finder

Model No.: JSD-SF001

Summary:

This is simple and fast-use small sized satellite finder. It is used to adjust the installation and fixing of satellite antenna. It is Elegant looking and pocket size (attention: Please dont close to metal objects while using).

It can find satellite signal accurately via satellite antenna and figure antenna azimuth angle and elevation angle out. It uses theodolite to locate antenna properly and then displays frequency signal magnitude. Continuously, adjusting azimuth angle and elevation angle with high precision, antenna will receive max signal intensity.

Characteristics:

1.75 BS type F outlet.

2. Inside installed micro lamp and buzzer.

3. Input frequency. 950-2250MHz.

4. Min. Input level: -40dBm.

5. Max. Input level: -10dBm.

6. Power supply: 13-18VDC

Technical parameters:

Frequency range 0.95GHz-2.15GHz

Gain 11dB

Sensitivity 7

Power supply DC13-18V

LNB gain 52-60dB

User guidance.

1. Installation and operation.

1). Use cable to connect satellite finder port and LNB port.

2). Connect "TO REC" port of finder to satellite receiver.

3). Make sure all above connections all right, turn on power and satellite receiver, micro lamp shines and pointer is swinging around position 1.

4). Adjust antenna azimuth angle and elevation angle to locate antenna accurately towards satellite location.

5). Adjust spiral button on front panel of finder to let pointer swinging around position 5.

6). Adjust antenna position, remnant power and LNB polarized angle until the pointer reaches utmost. Contrarotate spiral button and lower indicating value down until the value is not increasing.

7). Take satellite finder off and connect receiver to LNB.

2. Remarks.

1). In order to avoid the condition that finder reaches always to max value, please dont put finder in front of antenna.

2). While Using high plus LNB (plus value is over 60dB), you can connect an attenuator (attenuation value is 5 dB) between LNB and finder or use 6 meter length RG-59U cable instead of the attenuator.

3). If pointer wobbles all the time, that means the sensitivity is too high. You can clockwise adjust inside S. A spiral button to turn the sensitivity down.

Special Design for Receiver with DiSEqC 1. 2

Only One Coaxial Cable Control

Go To X Function

High Efficiency

Compact Structure

Ultra Low Noise

Adjustable Hardware Limits

Easy Installation with LED Indicator

For Dish up to 1. 2M

SPECIFICATION:

Protocol: DiSEqC 1. 2

Compatible Receiver: DiSEqC 1. 2 Receiver

Antenna Size: 120 cm Max

Speed: 1. 1Degrees/sec(at 13v); 1. 7Degrees/sec(at 18v)

Azimuth Angle: 40DegreesEast~32DegreesWest

Elevation Angle: 0~90Degrees

Input/Output Voltage: 13/18Vdc

Power Consumption: 50mA(Standby)

200mA(Normal)

350mA(Max. )

Satellite Positions: 60 positions

Goto 0 Position Function: Yes( Go to Reference Point)

Recalculation Function: Yes

Manual Button: Yes

Limit Protection: Programmable Software Limit

Connector: F-Type

Length of Connection: Max. 50 menter high quality RG-6U cable

Dimension(Mount): 256*213*124 mm3(Gross)

Weight(Mount): 2. 9Kg(Net)/3. 1kg(Gross)

1. 8 SAT & 1 Terr. TV inputs to 8 outputs for satellite receivers.

2. Built-in amplification circuit to compensate cable loss.

3. 8 SAT IF selected by 13/18DC&22 kHZ and DiSEqC 2.0 commands

4. Matriax routes between any input to any output.

5. Suitable for residential multiple LNBs reception.

6. Sheet metal housing with plastic holder.

Ku-band Universal Twin LNBF

Input freq. Range:

Low band: 10.70 to 11.70GHz

High band: 11.70 to 12.75GHz

L. O. Frequency:

Low band: 9.75GHz (1MHz @ 25 degree Celsius)

High band: 10.60GHz (1MHz @ 25 degree Celsius)

L. O. Stability:

Low band: 2MHz (-40 to +70 degree Celsius)

High band: 2MHz (-40 to +70 degree Celsius)

Output freq. Range:

Low band: 950 to 2050MHz

High band: 1100 to 2150MHz

Control signals:

Low band: Ca or Cb (see below)

High band: Ca and Cc or Cb

Noise figure: 0.7dB typ.

Conversion gain: 55dB typ.

Input VSWR: 2.5: 1

Output VSWR: 2.0: 1 (max. )

Output connector: F-female connector

Output impedance: 75 ohms typ.

Cross polar isolation: 20dB (min. )

Image rejection: 45dB

Phase noise:

-50dBc @ 1KHz

-75dBc @ 10KHz

-95dBc @ 100KHz

Supply voltage:

Ca: 11.5 to 14.0V (vertical polarization)

13 VDC typ. Cb: 16.0 to 19.0V (horizontal polarization)

18 VDC typ.

Cc: Continuous 22KHz

Operating temperature: -40 to +70 degree Celsius

Storage temperature: -40 to +80 degree Celsius

Relative humidity: 0% to 95%

The SF3000 Digital Satellite Finder Meter is an innovative professional satellite identification and alignment meter. This device is easy to operate. The signal strength and picture quality (BER) meter will speed up and improve your dish installation.

If you are a professional installer and want a finder that can identify a particular satellite, then this is the one!

It communicates with the satellite's digital transmissions with "Unique Satellite Information Data" (USID). While most pointing devices only give you a general idea that there are indeed satellites in the sky and allow you to peak the signal, the SF3000 takes you one step further by positively identifying the satellite.

QUICK FIND FEATURE

Why drag a TV and satellite receiver to the roof, when you can do the whole job with just a small and easy to carry tool like this!

At less than 2 lbs in weight, you can carry it anywhere you want.

It has a LOOP OUT to connect to your receiver if you wish.

Don't waste your valuable time or money on cheaper analog meters. Use this professional meter for all you installations. This digital satellite meter will maximize the number of installations any installer can perform in a day and is very easy to use.

What used to take half and hour to an hour now takes a few minutes to find and peak the signal! Time is valuable, why waste it!

Improve your service call efficiency and speed.

FEATURES

Set satellite's related parameter which includes LNB frequency and working voltage (mode of polarization), satellite downstream frequency, symbol ate, 22K situation etc.

Align dish without IR/D, TV and power.

In alignment process, once a satellite is found by setting related parameter, we can adjust the dish's orientation and pitching angle according to inside audible tone

Measure RF signal level, bit error rate, carrier-to-noise rate and current.

Pre-programmed to most regionally used satellites.

Uses USID.

Signal strength and Bit Error Rate (Picture Quality) displayed simultaneously.

Easy reading LCD display.

Back lit display.

Up to 40 satellites come pre-programmed. You can add, change or delete the satellite info manually.

Bar-graph for Signal Strength.

Bar-graph for BER (Picture Quality).

Satellite settings store in non-volatile EPROM

Short circuit proof on LNB output.

Works with all stander, universal, linear (DVB) and circular (DSS) polarity LNBs.

Receives Free To Air Digital Satellite broadcast

3000 Channels Memory

DVB, MPEG-2 Compliant

SCPC/MCPC Receivable from C/KU-band satellite

Digital Tuner with Loop-through out

MPEG-2 Main Profile at Main Level

Easy Graphic MENU Interface

RS232C Port for Updating Control Software and Additional Service (optional)

Support DiSEqC1.0 or 1.2

Last Channel Memory

Multi-language OSD Menu

Parent Lock Control

Automatic PAL/NTSC Detection

Quick Channel Display

Small Screen Window Display

Front Panel Key & IR Remote Controller User Interface

Editing Functions(TV or Radio Channel, Channel Name, PID, Transponder Name, Favorite List Name)

Channel Memory for Multi-Satellite.

3 Operation Modes (Digital TV, Digital Radio, 5 Favorite Groups)

DiSEqC LNB, 13/18V, 0/12V, 0/22KHz Tone

2-SCART Connectors (optional)

21-69 UHF PLL Modulator (optional)

Dreambox500s

( order in adavance, deposit 30% by T/ T, balanace after shipment, delivery time is 20 to 30days after taking deposit)

Powerful receiver for digital TV and radio programs. Main features are a

250 MHz IBM powerpc (350 mips) .

Linux op, the dreambox supports the standard linux API

( directfb, linux-fb, lirc, . . . )

Features:

1) 250 MHz IBM powerpc processor (350 mips)

2) linux operating system

3) 1 x smartcard-reader

4) mpeg2 hardware decoding

5) 100mbit full duplex ethernet interface

6) 2 LED status

7) unlimited channel lists for TV / radio

8) channel-change time < 1 second

9) full automatic service scan

10) supports directly bouquet-lists (indirect unlimited)

11) supports epg (electronic program guide)

12) supports multiple lnb-switching control (supports diseqc)

13) fully adaptable osd in many languages (skin-support)

14) spdi / f interface for digital bit stream out (AC-3 / DTS)

15) 1 x scart-interfaces (fully controlled by software)

Technical specification:

Dbs-tuner:

Frequency range 950-2150 MHz

Signal level-65 dbm-. -25 dbm

Signal-to-noise level 12 db max.

Dbs-tuner input connector f-type female

Input impedance 75 ohm

Afc / -3 MHz

Demodulation shaped qpsk

Input symbol rate 2-45 mbaud / s, scpc / mcpc

Fec viterbi and reed-solomon

Viterbirate 1 / 2, 2 / 3, 3 / 4, 5 / 6, 7 / 8, automatic assimilation

Roll-off factor 35%

Demultiplexing according ISO 13818-1

Video decoder:

Video compression MPEG-2 and MPEG-1 compatible

Video standard PAL g / 25 hz

Video formats 4: 3 / 16: 9

Footage 16: 9, automatic assimilation for 16: 9 TV-device (over scart)

Letterbox precolating for 4: 3 TV-device

Audio decoder:

Audiokompression MPEG-1 & MPEG-2 layer I and II

Audio mode dual (main / sub) , stereo

Frequency: 32 khz, 44.1 khz, 48 khz, 16 khz, 22.05 khz, 24 khz

Output analog:

Output level L / r 0, 5 vss on 600 ohm

Thd > 60 db (1 khz)

Crosstalk <-65 db

Output digital:

Output level 0, 5 vss on 75 ohm

Sampled data filtering 32 khz, 44. 1 khz, 48 khz

S / pdif-output optical (ac3)

Video parameter:

Input level fbas 1 vss / -0.3 db on 75 ohm

Teletext filter in conformity with ets 300 472 standard

TV-scart:

Output: fbas, RGB, s-VHS over osd selectable

Serielle interface rs 232:

Typ rs232 bidirectional

Bit rate 115, 2 kbit / s max.

Plug connector sub-d-9

Function update of firmware and preprogramming

Ethernet:

100 mbit compatible, bi-direktional interface

Function update of firmware and preprogramming

Lnb power and polarisation:

Lnb current 500ma max. ; short-circuit-proof

Lnb voltage vertical < 14v without load, > 11, 5v at 400ma

Lnb voltage horizontal < 20v without load, > 17, 3v at 400ma

Lnb shut-off at standby-mode

Count of active satellite position:

Diseqc 1.0 / 1.2 sat position / sat option

Diseqc-rotor control

Power consumption:

< 10w / 12v

Input voltage:

Dc12v, alternating acurrent / -15%

Extern power supply:

Input:

110-240v AC / 50-60hz / 0, 6a

Output:

12v = / 1a

Others:

Ambient temperature-15 c-40c

Humidity < 80%

Model: ddt500s

NS-4001 is a computing platform for developing versatile GPS navigator and media player in one device. It is the solution to designing pocketsize, lightweight devices that are perfect for people on the go, who need mobile, real-time digital information and enterainment.

Equipped with a high-sensitivity GPS receiver, NS-4001 can receive positioning signal from the satellite in a car, even in the city area where there are tall buildings. It can also play back various types of digital media content, including audio and photos, and provides connectivity to PCs as well as home entertainment systems.

With more and more people traveling regularly and at great distances, a mobile device with GPS map guide and versatile media playback features is required to provide users better travel service. NS-4001 is the perfect gadget. Alternatively, removeable media storage cards containing digital content can be inserted and users can play back the media on the device.

NS-4001 can also be connected to PCs to download media files.

Features:

-GPS Navigation

-Stand alone and Portable

-Car Mount included, easy to install

-4" TFT LCD panel

-MP3 Music player

Digital Photo viewer

Categories: Semi finished articles->Communication Apparatus

Product number: Co0004

Name: Satellite Receiver

Clicks: 9 times