Features: - 250 MHz PowerPC Processor (350 Mips) - Linux Operating System - 1 x Smartcard-Reader - MPEG2 Hardware decoding - Common available NIMs (DVB-S, DVB-C, DVB-T) - Tuner modules, Plug&Play - V. 24/RS232 Interface - 10/100Mbit compatible Ethernet Interface - 2 LED status - 32 MByte Flash, 96 MByte Ram total - integrated IDE UDMA66 Interface - Support for internal HDD 2, 5" in any capacity - unlimited channel lists for TV/Radio - channel-change time < 1 second - full automatic service scan - supports directly bouquet-lists - supports EPG (electronic program guide) - supports own videotext - supports multiple LNB-Switching control (DiSEqC) - fully adaptable OSD in many languages and skin-support - S/PDIF Interface for digital bit stream out (AC-3) - 1 x Scart-interfaces - S-Video connector - analoge modem DreamBox DM600 technical data DBS-Tuner: Frequency Range 950...2150 MHz Signal Level - 65 dBm...- 25 dBm Signal-to-Noise Level 12 dB max. DBS-Tuner Input Connector F-Type female Input Impedance 75 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation Roll-off Factor 35 % Demultiplexing according ISO 13818-1 Video decoder: Video Compression MPEG-2 and MPEG-1 compatible Video Standard PAL G/ 25 Hz Video Formats 4: 3 / 16: 9 Footage 16: 9, automatic assimilation for 16: 9 TV-Device (over Scart) Letterbox precolating for 4: 3 TV-Device Audio decoder: Audiokompression MPEG-1 & MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Output analog: Output Level L/R 0, 5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Output digital: Output Level 0, 5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3) Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-Scart: Output: FBAS, RGB, S-Video Serielle Interface RS 232: Typ RS232 bidirectional Bitrate 115, 2 kBit/s max. Plug Connector SUB-D-9 Function: Update of Firmware Ethernet: 10/100 MBit compatible interface Function: Update of Firmware, Connect to PC UDMA66 IDE Interface: Intern for connect 2, 5" HDD LNB Power and polarisation: LNB Current 500mA max.; Short-circuit-proof LNB Voltage vertical < 14V without load, > 11, 5V at 400mA LNB Voltage horizontal < 20V without load, > 17, 3V at 400mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Power consumption: < 15W / 12V Input voltage: DC12V, alternating acurrent +/- 15% Extern power supply: Input: 110-240V AC / 50-60Hz / 0, 6A Output: 12V = / 2, 5A Physical specification: Ambient Temperature +15C...+35C Humidity < 80% Size (W x D x H): 195 mm x 130 mm x 40 mm |
||
| Open Box X810, Receiver 5 visits
Hi, we supply newest styles for receiver open box x820, it with rs232, and usb and smart card, now sell so hot in European market, if you are interested in this style, please feel free to contact me, the price is very good! |
||
| CATV Outdoor Splitter and Tap 3 visits
Suitable for 5 to 1, 000mhz system single-directional or bi-directional network transmission system it has high isolation degree, low power consumption and flat frequency characteristic each path has over-current waterproof performance is strict, 5/8 standard interface ideographic types are 1-2 splitter and 2-3 coupler and their parameters are same to an organic whole couplers and splitters. |
||
| Satbeeper 12 visits
Logarithmic regulated circuit, no adjustment needed Monitor buzzer sound by ear phone Operating voltage: 13-18V Frequency range: 950-2, 400 MHz DC input: 20V/60mA regulated Impedance: 75 ohms |
||
| Satellite Receiver (3100) 2 visits
Satellite Receiver We promise: That if you offer us a sample we can OEM the same as the product from you. Strong 4620, Strong 4620II, Strong 4622, Strong 46222II, Strong 4622X, Strong 4650, Strong 4651X, Strong 4652, Strong 4653X, Strong 4820II, Strong 4822, Strong 4822x; Starsat 4000, Starsat 4200d, Starsat 3500, Starsat 3100, Starsat 550D, Starsat 190D; Viewsat 2000 xetreme, Viewsat 2000 ultra; Coolsat6000, Coolsat6100, Dearmbox500 Fortee star 5600+ Kaon202, Kaon220 Supermax Sonicview ACE. |
||
| Digital Satellite Receiver(WS-9838) 4 visits
Function and characteristic: International advanced solution Easy browse inside picture and EPG Multi-language support OSD menu MCPC/SCPC Compatible Easy installation of aiming antenna High quality picture and Super low threshold design PAL-NTSC auto-conversion system Multi-switch control: 22KHz,DiSEqC1.0,1.2 High quality output port Stereo/Mono output C/KU Band compatible Automatic search for transponders and channels Large memory 4000 channels programmable High quality picture and Super low threshold design Calendar setting,wakeup and sleep timer Easy upgrading (Receiver to Receiver) Auto and manual PID setting Wide range switch power (AC80~265V) |
||
| Dreambox Satellite Receiver(Dreambox DM500-S) 4 visits
- 250 MHz IBM PowerPC Processor (350 Mips) - Linux Operating System - 1 x Smartcard-Reader - MPEG2 Hardware decoding - Common available NIMs (DVB-S, DVB-C) - V. 24/RS232 Interface - 100Mbit full duplex Ethernet Interface - 2 LED status - Unlimited channel lists for TV/Radio - Channel-change time < 1 second - Full automatic service scan - Supports directly bouquet-lists (indirect unlimited) - Supports EPG (electronic program guide) - Supports multiple LNB-Switching control (supports DiSEqC) - Fully adaptable OSD in many languages (skin-support) - SPDI/F Interface for digital bit stream out (AC-3 / DTS) - 1 x Scart-interfaces (fully controlled by software) DBS-Tuner: Frequency Range 950 - 2150 MHz Signal Level - 65 dBm - 25 dBm Signal-to-Noise Level 12 dB max. DBS-Tuner Input Connector F-Type female Input Impedance 75 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK Input Symbol rate 2-45 Mbaud/s, SCPC / MCPC FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation Roll-off Factor 35 % Demultiplexing according ISO 13818-1 Video decoder: Video Compression MPEG-2 and MPEG-1 compatible Video Standard PAL G/ 25 Hz Video Formats 4: 3 / 16: 9 Footage 16: 9, automatic assimilation for 16: 9 TV-Device (over Scart) Letterbox precolating for 4: 3 TV-Device Audio decoder: Audiokompression MPEG-1 & MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Output analog: Output Level L/R 0, 5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Output digital: Output Level 0, 5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3) Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-Scart: Output: FBAS, RGB, S-VHS over OSD selectable Serielle Interface RS 232: Typ RS232 bidirectional Bitrate 115, 2 kBit/s max. Plug Connector SUB-D-9 Function Update of Firmware and Preprogramming Ethernet: 100 MBit compatible, bi-direktional interface Function Update of Firmware and Preprogramming LNB Power and polarisation: LNB Current 500mA max.; Short-circuit-proof LNB Voltage vertical < 14V without load, > 11, 5V at 400mA LNB Voltage horizontal < 20V without load, > 17, 3V at 400mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Power consumption: < 10W / 12V Input voltage: DC12V, alternating acurrent +/- 15% Extern power supply: Input: 110-240V AC / 50-60Hz / 0, 6A Output: 12V = / 1A Physical specification: Ambient Temperature +15C...+35C Humidity < 80% Size (W x D x H): 195 mm x 130 mm x 40 mm Weight: 1.5 kg |
||
| Ku Band LNBF 9 visits
LO Frequency: 11.3GHz Reflector Type: OffsetF/D Ratio: 0.6 Feedhorn Mounting: 40mm (Standard Size) LO Initial Accuracy (@ 25C): + -1MHzLO Temperature Drift (@ -4060C): + -3MHz LO Phase Noise (@ 1KHz offset): -60dBc/Hz (@ 10KHz offset): -80dBc/Hz (@ 100KHz Offset): -100dBc/Hz Noise figure: 0.3dB (Typ. ) Conversion Gain: 55 65dB Gain Variation (over operating band): 5dB p-p (Typ. ) Gain Flatness (any 27MHz): + -0.5dB Cross Pole. Isolation: 20dB (Min. ) 25dB (Typ. ) Image Rejection: 40dB (Min. ) Output Power (1dB compression Point): 0dBm (Min. ) Output VSWR: 2.0: 1DC Current Consumption: 90mA (Typ. ) 110mA (Max. ) Polarization Switching Voltage: Vertical: 1114.2V, Horizontal: 15.5 21V Operation Temperature: -40C +60C Storage Temperature: -50 C +80C Output Connector: 75ohm, F type |
||
| Satellite Receiver (320B+ patch) 2 visits
The DS9800 is a low cost digital satellite receiver with high performance, which enables the user to view the FTA programs and some specials channels. It's based on the chipset of Conexant CX24138. Product main features: Fully complied with DVB-S/MPEG II; Fully complied with SCPC, MCPC, C-band and Ku-band; RF output; DiSEqC1. 2, LNB Voltage(13/18V) switch; Support PIG (Picture in Graphics); Multi-Language OSD; Support EPG (electric program guide); Support RS232 port; Support multimedia audio; 3 games embedded; Auto PAL/NTSC/SECAM Detection; Mass Satellite and Program Storage ( Up to 4000 Programs); |