China Pump & Vacuum Equipment

1. Light weight

2. Good wear-resistance

3. Long service time for spare parts

4. Reliable seal, no leakage

5. Simple structure, easy for assembly and disassembly, easy maintenance

6. Good cavitation capability.

Application Area: It is widely applied for treating pool, river, and sea as the drainage equipment.

Running Data:

1. Capacity: 180-28000cbm/h

2. Head: 25-95m

3. Pressure: <1.6MPa

4. Outlet diameter: 100-1200mm

CPS Series pumps, are single-stage double suction split case

Centrifugal pumps designed for applications of clean water or similar liquids without solids in water works, municipal and industrial projects, as well as mines, power plants and agricultural irrigations etc.

The horizontal installation constructed with the suction and discharge nozzles located in the lower part and in right angle to the pump shaft central line, makes it convenient to pull out the rotor after removing the pump cover when maintaining and repairing without disturbing the inlet and outlet piping. Medium contacted parts are selectable from ductile cast iron, cast steel and stainless steel upon request.

1. Power end

Continuous tooth herringbone gear. One-piece alloy steel crank. Renewable crosshead guide. The frame is made of welded steel plate to

Provide the frame with strength, good rigidity and lightweight.

The extension rod packing is of duplex seal structure to provide the good seal result.

The power end uses the combined lubrication system of forced lubrication and splash lubrication.

2. Crankshaft

The crankshaft is made of cast alloy steel and is furnished with

Big-geared ring, connecting rod and bearing.

The tooth form of the big-geared ring is herringbone gear.

The gear bore and the crankshaft surface is interference fitted and they are both fastened with bolts and lock nuts.

The big end of the connecting rod is mounted on three eccentric straps of the crankshaft through single row short cylindrical roller bearings and the small end on the crosshead pin through double row long cylindrical roller bearing. Double row radial spherical roller bearings are mounted at both ends of the crankshaft.

3. Cylinders

Cylinders are made of forged alloy steel. Three cylinders of each pump are interchangeable. Valve-over-valve (through type cylinder) design reduces the cylinder volume and promotes the volumetric efficiency. At customers' request. The cylinder surface may be nickel plated to improve the abrasion resistance.

Self suction centrifugal oil pump, CYZ series is suitable for petroleum industry, oil warehouse, oil vehicles, etc, it can also be used as oil pump of ship, cabin pump, fire fighting pump, cooling water recycling pump, etc. It can pump gasoline, koresene, diesel, sea water, clean water, the temperature of the medium is -20-140&deg; C, if to pump chemical liquid, only need to replace the seal which can stand against corrosion.

It is a centrifugal pump with self suction, simple instructure, easy operation, smooth run, easy maintenance, high efficiency, long life span. It has rather strong suction. Do not need base value for the pipe system. Before working, it needs only a certain amount of leading oil. When used in oil tanker or water carrying vessel, it can be used a sweeping pump. The pump is made of fine materials. It adopts hard alloy mechanic sealing. It does not need safety valve in the outlet pipe, which simplify the piping system.

Working capacity: 3.2 -500M&sup3; /hour

When placing order, please advice: The inlet diamter, flux, head, voltage, frequency, rotating speed, temperature of medium, thickness of medium, specific gravity, viscidity, if there are particles.

HX7400 Manual Hydraulic Gauge is composed of hydraulic pump, pressure-regulation system, micro-adjusting valve, backpressure valve and output interface. The gauge adopts a full curing structure. It is characterized by high sealed performance, stable compression, quick pressurizing and easy operation.

Functions

HX7400 Manual Hydraulic Gauge provides pressure for calibrating non-oil gauges such as oxygen gauge, acetylene gauge. It can be extensively used in power, chemical, petrol, metallurgy, metering, military industry etc.

Characteristics

1 Combination of fine stainless steel and hermetic technology in the military industry

2 Simple operation, minimal leakage and convenient washing

3 Fast connection, quick pressurizing and easy operation

4 The product is used for calibrating all kinds of non-oil gauges such as oxygen gauge, acetylene gauge

Technical Specification

1 Pressure range: (0~6)MPa (0~10)MPa (0~25)MPa (0~40)MPa (0~60)MPa (0~72)MPa

2 Stability: 0.05% F. S

3 Pressure-transmitting medium: Ethanol, distilled water

4 Interface output:

Weight: 8Kg

WX-0.5 WX-1 WX-2 WX-4 WX-8

Beijing Leapyou Electromechanical Devices Company assembles the famous brands from domestic and foreign first-class companies which enjoy a high reputation in the area of vacuum equipment. We supply advanced technology, high performance and reasonable price of all types of vacuum pumps, including the sales and services of the vacuum product like vacuum equipment, Vacuum pump oil, Vacuum valves, vacuum resin, vacuum gauges, vacuum regulation, vacuum tube connector road and etc. We also supply a full range of equipment and the accessories.

There are eight series pumps categories include jet series water pumps, self-priming pumps, centrifugal pumps, double impellers pumps, peripheral pumps and other pumps.

The pump models include JET60A/80A/100A, JETS60/80/100, DP255A, DP355A, CPM128, CPM146, CPM158, IDB35/40/60/70 etc. They are widely applied in domestic applications, gardens, wells and so on.

Brand: GPM

DESC.: Water pump

Price terms: FOB ShangHai or GuangZhou, CIF, C&F

Payment terms: T/T, L/C at sight.

Packing: Brand packing or OEM packing.

We can produce for kinds of Japanese, European, Korean vehicles.

OEM is available