China Pump & Vacuum Equipment - Page 81

Outlet Size(mm): 100

Inlet Size(mm): 100

Rated Rotation Speed (rpm): 3600

Max. Flux(m3/h)96

Max. Lift(m): 30

Max. Suction(m): 5

Continues Time(hour): 2.5

Engine Model: YH173F

Displacment(mL): 242

Max. Power Output HP(KW)/rpm: 8.0(5.9)/3600

Fuel Tank Capacity(L): 3.6

BorexStroke: 73x58

Compression Ratio: 8.2: 1

Fuel Consumption(g/KW. H): 374

Engine Type: OHV250, Single Cylinder, 4 Stroke, Forced Air Cooling

Air Cleaner Type: Semi-dry, Oilbath, Foam Filter Element

Ignition System: Transistor Magneto

Starting System: Recoil Start

Our various kinds of pumps provide you a wide option, there are 2-stoke gasoline engine, 4-stroke gasoline engine and diesel engine as the power for pump series.

This equipment is suitable for purification of lubricating oil, including hydraulic oil, quenching oil, refrigerator oil, heat conducting oil, gear oil, hydraulic transmission oil, etc. Through the equipment, water, gas and mechanical impurity in oil can be removed rapidly, so as to resume functional performance of the oil. This equipment can be operated with ammoniac oil safely in a long time by means of special elements configured.

Pump-Air Pump-Electric Air Pump-AC/DC Electric Air Pump

Our Electric Air Pump is used to inflate and deflate those inflatable products, such as air bed, air mattress, inflatable toys, etc.

Input Voltage: DC12V

Power: 20W

Pressure: 2200-3000pa

Airflow: 280L/min

Noise: 30db

Our electric air pumps includes ac electric air pump, dc electric air pump, ac/dc electric air pump, rechargeable battery electric air pump, etc.

GuLin-II air pump is used to inflate air bed. This pump consists of the pump, two controllers and the Power source adapter. The product uses advanced SCM control technology and can automatically adjust and control the air pressure.

It can independently control 2 separate air chambers to adjust the pressures of the chambers.

Working voltage: 12VAC 50/60HZ

Pressure adjustment scope: 5-99mbar

Working power consumption: 20W

Standby power consumption: 3W

Cast iron finished parts of auto pump

Material: Grey and ductile iron

3NBZ series drilling pumps, which are used to circulate drilling fluids, cleaning bottom of the hole, carry the drill cuttings out of the hole, cool, clean and lubricate the bit, and support the wall in drilling operation in oil and gas field, are a kind of horizontal medium-speed triplex single-acting piston pump. It is especially suited to high press-ure jet drilling for increasing penetration rate, and it can also supply flowing drilling fluids for downhole motors to drive the downhole drilling machines and downhole tools. 3NBZ series drilling pumps take the advantages of the current L-shaped pumps take the advantages of the current L-shaped pumps and vertical pumps in the world. This new series of triplex pump which possesses lighter weight, smoother discharge flow, lower pressure fluctuation, reliable operation, easier maintenance, longer service life and higher efficiensy, are originated by our factory.

3NBZ series drilling pumps are composed of the power end and the fluid end. The power end includes the following parts such as: frame, a drive shaft, a driven shaft, a transmission shaft of lubricating oil pump, and a lubricating system. The fluid end includes the following parts such as: valve pots, liners and pistons, high pressure manifolds, suction manifolds.

To prevent air pockets and to reduce pressure fluctuation, an upright pulsation dampener are reparately mounted on the suction manifolds and by the exhaust inlet of high pressure manifolds in fluid end.

The gears, shafts, crossheads, and guide blocks in the power end are lubricated by a dual-protection lubrication system with a gravity-splash lubricaion and pressure-fed lubrication.

SUNBO Ring Blower

WORKING PRINCIPLE: Ring blower's impeller contain numerous blades in its edge and it is special designed for a high air pressure...When the impeller rotates, as centrifugal effect, the air between two blades be transferred rapidly to the edge and gain higher speed. After coming back into the impeller again thought the channel of blower, the air transferred again and speed again. Since numerous blades help transfer energy, the air pressure increases progressively and present high air pressure.

FEATURES: Low noise and vibration: Dynamic balancing minimizes vibration.

DUST-PROOFED SHAFT SEAL: Protects bearings from contaminated air stream and possible foreing particle damage.

High reliability: Directly connected motor shaft-impeller provides reliable, long term performance. No gears, belts, motor brushes or sliding blades to require periodic maintenance.

Space-efficient design: Unique disign results in substantial airflows at moderate pressures in minimum space and weight.

Versatility: Easily throttled and changed from pressure to suction operation. May be mounted in a variety of fashiond.

Stable airflow: Centrifugal compressor design delivers smooth, stable airflow with no pulsations. High-pressure airflow: Produces continuous high-pressure airflow. The Ring Blower is ideally suited to many industrial applications.

Applications:

1. Wastewater treatment systems in high buildings, mines, industrial and municipal projects.

2. Drainage sewage relay and treatment in municipal environment protection systems.

3. Field drilling and mining.

4. Drainage in foodstuff, pharmacy and commercial systems.

5. Drainage in flood control and water plants.

6. Drainage in agricultural irrigation and so on.

We are offering a wide range of gasoline water pumps. The outlet varies from 25mm to 100mm. It has high displacement, perfect lift, beautiful appearance and steady working. Our water pump has passed the endurance test over 500 hours with high combing performance. They can be used in a wide variety of applications such as agricultural, construction sites, watering, sprinkler systems, fire fighting, and general home use. It changes the water world according to your request.

Pump type: Centrifugal

Suction (m): 32

Lift (m): 5

Discharge capacity (m3/h): 38

Enduring experience time (h): 500

Suction port diameter (mm): 50 (2 inch)

Discharge port diameter (mm): 50 (2 inch)

Start method: Recoil

Fuel tank capacity(l): 3.6

Volute:Aluminium

Strainer part: With

Packing method: 1 unit / carton

Net weight (kg): 28

Gross weight (kg):3 0

Case dimension L*W*H mm): 515*415*425

FCL 20 feet / 40 feet / 40 feet high: 305/625/750,

We can supply water pumps and air cooler motor suitable for farm, garden, drinking etc.We can offer a wide range of designs and different metal processing to meet your requirements. Your own designs are most welcome.

We are willing to establish a pleasant and lasting business relationship with you and assure you of our excellent quality,lowest price and best serves.