China Pump & Vacuum Equipment - Page 321
Range of Application Water supply of domestic and fire control needs in high-rises, water supply and drainage in factories and mines, and cycling use of water in low-pressure boilers. Technology Parameters Flow: 6.5-50m/h Head: 20-120m Rotary Speed: 2900r/min Calibre: Phi320-Phi80 Temperature Range: 0-+80º C Working Pressure: ≤ 1.2MPa³ |
||
| PX /2SCM Series Centrifugal Pump 1 visits
The pump is suitable for civil and industrial uses to pump clean water and chemically non-aggressive liquid.They have a compact size and are extremely reliable, very simple to use and almost maintenance-free. |
||
| Pump (IDB-35) 1 visits
Product Name: IDB-35 Product Number: IDB-35 Product Catalogue: KF/MDP/IDB/CP/MQP/MK/DB Structural Characteristics: Cast iron pump body Stainless steel mechanical seal(graphite to ceramic) Brass impeller with radial preipheral blades Protection IP44 45# steel or stainless iron shaft With thermal overload in single phase motor |
||
| Multistage Centridugal Pump (CHF4-20) 1 visits
Operating conditions: 1. Max. Working pressure 8 bar 2. Liquid temperature up to 90º C 3. Ambient temperature up to 40º C 4. Total suction lift up to 8mt. 5. Continuous duty Motor: 1. Single phase power supply with capacitor permanently activated(n=2850r. P. M.) 2. Insulation Class B/F 3. Protection IP44 Material: 1. Stage casing: AISI304 Stainless steel. 2. Impeller: AISI304 Stainless Steel 3. Diffusers: AISI304 Stainless Steel 4. Suction casing: Cast Iron 5. Shaft with rotor: AISI304 Stainless Steel 6. Mechanical seal: NBR/Graphite/Ceramic Application: CHF horizontal multistage stainless steel centrifugal pumps are designed for the following applications: Mainly application for conveying of industrial liquid and pressure for demineralized water, soft water purified solution, light oil, etc. * Cooling water supply * Industrial cleaning * Aquiculture * Pesticide dosing systems * Environmental protection * Boosting & circulation systems Multistage Centrifugal Pump Model: CHF4-20/4-30/4-40... Power: 0.55 - 1.5KW Inlet/Outlet: 1.25"*1" 1.5"*1" Flow: 190L - 230/min Head: 18 - 45m Max. Suct: 8m GW: 12KG(CHF4-20) Packing Dimension/Unit: 345*180*215(CHF4-20) QTY/20'(unit): 2000(CHF4-20) 220v/50Hz, 230v/50Hz, 220v-380v/50Hz, 110v/60Hz & 115v/60Hz models are available on request |
||
| Hand Pump (H2008-5) 2 visits
Size: ?38x580 Qty: 12pcs G. W/n. W: 13kg/12kg Meas: 65x35x46cm |
||
| Motor (6MS) 5 visits
1.Full speed 2875RPM design point(50HZ) 2.Max.Temperature of winding agrees with NEMA200 3.Epoxy autogenous healing system 4.Close stator winding 5.Stainless steel casing 6.Stainless steel spline 7.Self-adjusting water lubricant high axial force bearing 8.Pressure balance membrane |
||
| Deepwell Automatic Pump 3 visits
DP series pumps are suitable for suction from deep wells, and the series installed above grand with the get body submerged guarantees fuctioning even when the static level of the well water fulls as far as of meters below the level of the installed pump. For this reason these pumps are extremely reliable, economical and simple to use and find many use in domestic where the suction depth exceed the normal capacity(9meters) for surface pumps. Suction lift up to 45m Maximum ambient temperature +40C |
||
| Gasoline Water Pump (WP20X) 5 visits
Models from 1" to 4" For the details, pls vist our webiste at our website. |
||
| Gasoline Water Pump 1 visits
Suction/Discharge port dia: 40mm (1.5") Rated speed (HP/rpm): 3, 600rpm Cont head: 26m Max flow: 5m3/h Max suction head: 7m Max self-priming time: 40S/4m Engine Model: SG87 Engine Type: 4-stroke, single cylinder OHV forced air-cooled gasoline engine Engine Bore x stroke: 54 x 38mm Engine Displacement: 87cc Engine Max power output: 2.6HP/3600rpm Fuel tank capacity: 1.6L Engine oil capacity: 0.37L Dimension: 420mmx335mmx335mm Dry weight: 18kg |
||
| Gasoline Water Pump (DJ50CL/80CL/100CL) 2 visits
Model DJ50C DJ80C DJ100C/DJ100CL Pump Suction & discharge Dia mm(in) 50(2) 80(3) 100(4) Max. Total head m 21 23 26 Suction lift m 8 8 8 Max. Capacity L/min 700 000 1800 Engine Model DJ160 DJ240 DJ340 Dispacement cc 163 242 337 Max. Output hp/rpm 4.8/3600 7.1/3600 9.9/3600 Cont. Output hp/rpm 4.5/3600 6.5/3600 9.0/3600 Fuel tank capacity L 3.7 6.0 6.5/12.5 Unit Dimensions LxWxH mm 480X380X400 520X410X450 640x580x520 Dry weight kg 20 28 40 |