China Pump & Vacuum Equipment - Page 2

Multi stage series:

Capacity: 1~10m3/h

Deferential head: Max. 82m

Single stage series:

Capacity: 3~60m3/h

Deferential head: Max. 60m

Speed: 2900r/min

Voltage: 200V~600V

Frequency: 50Hz, 60Hz

Power: 3.0~8.5KW

OT: -50~+30oC

Pressure rating: 2.5MPa

Material:

Pump casing in Nodular cast iron

Impeller in Grey cast iron

Application: For pumping ammonia, freon, lithium-bromide etc. Typical application ranges include rail vehicles, toboggan-runs, bob runs, breweries, etc. Germany technology. Standard confirmming to DIN24256/ISO2858, canned motor confirming to IEC.

The features including:

-long service life

-low operating costs

-low NPSH values

-completely leakage-free

-rapid and reduced acquisition and stockkeeping of spare parts.

Engine Model OHV25 title single cylinder forced air cooling 4-stroke

Bore*Stroke 68*45(mm)

Displacement 163(ml)

Max. Output 4.0/3600[kw/(r/min)]

Recommended output 3.4/3600[kw/(r/min)]

Max. Torque 10/2500[N. M/(r/min)]

Starting system Recoil start

Engine oil designation SAE 15W/40 (GB11121-1995)

Fuel designation 90#(GB17930-1999)

Fuel tank capacity 3.6(L)

Engine oil capacity 0.6(L)

Dimension 560*450*415(mm)

Horse Power 5.5Hp

Pump model Aluminum alloy, self-suction centrifugal pump.

Inlet dia. 50(mm)

Outlet dia. 50(mm)

Max. Lift head 26(m)

Max. Suction head 8(m)

Max. Capacity 25(m3/h)

Self-absorb time d180sec

Net weight 24(kg)

Zhongneng Diesel Oil, Gasoline Oil and Fuel Oil Purification (oil filtration, oil purification, oil filter, oil purifier, oil recycling, oil treatment, oil regeneration, oil restoration, oil filtering, waste oil disposal, oil reclaiming, waste oil management, energy saving, oil reconditioned, oil reconstituted, oil restituting, oil recovering)

Application:

This machine integrates fine filter, high efficiency demulsification and dehydration into one body. This machine, which can remove large of water without heating, creates the fastest dehydration speed in domestic at present. This machine can quickly separate water from the oil, which even contains half water, to attain cleanness of NAS six grade, Convenient using with the go-cart model designed. This machine is suitable for treating light oil with high water content.

Features:

1. TYB series purifier adopt special oil water separator which requires no heating offering more than 20 times dewatering efficiency over other types of purifiers.

2. As no heating is needed, the additives in the oil are well prevented from degradation or deterioration.

3. Easy-to-operate, water can be discharged online automatically without the presence of duty operators.

4. Low operation cost, 20%-40% lower than vacuum purifier, centrifugal purifier and filter press.

Application:

It is mainly purify the various of insulating oil, includes transformer oil, switch oil, electric capacity oil and so on. The machine, which is suitable oil purifier in electrical apparatus manufacture factory, power station, power supply department, transformer in railroad station and other department, can filter insulation oil for transformer, mutual inductor, electric capacity and hi-pressure switch. The machine also can deal with vacuum filtering and dry the heating oil circulation for the large electrical apparatus.

Features:

1. Besides the common vacuum oil purifier's function of dewatering, degassing and eliminating impurities, this machine can regenerate the seriously deteriorated oil by removing the polarity materials, such as the deep oxides, free carbon in the oil effectively. It can make the seriously deteriorated oil reach to the normal index like anti-oxides, acid- alkali water-solubility

2. The performance and lifetime of insulating oil will improve and extend awfully after purification and regeneration.

Feature:

Self water return system. In-line water strainer. Anodize crankcase. Forged brass manifold. First-grade ceramic plunger. Germany parker new design u-packing. Detergent injection

No. Of commodity: Lifeng high pressure pump

Name of commodity: Model 3wz-1812a

Pressure: 210bar/2900psi

Water flow: 25.6l/min (4gpm)

Power 4-11kw

Bore: 18mm

Stroke: 12mm

Water pumps ranging from 1.3 kW to 2.8 kW for agricultural use, with 1.5 inch, 2 inch, 3 inch, and 4 inch discharge , either SUPOW or HONDA powered.

Supow pumps stand in Economical version, Regular version and Business version. It is ready, you decide what will drain

Item BG(ZS)QGZ80-30 BG(ZS)QGZ100-30

Outlet size(mm) 80(3") 100(4")

Inlet size(mm) 80(3") 100(4")

Speed(rpm) 3600 3600

Displacement(m3/h) 54 96

Lift(m) 30

Suction(m) 5

Engine model ZS168FA ZS173FA

Displacement(ml) 163 242

Max output(kw/rpm) 5. 5(4. 1)/3600 8. 0(5. 9)/3600

Fuel volume(L) 3. 6 6

Bore x stroke(mm) 68x45 73x58

Compression ratio 8. 5: 1 8. 2: 1

Oil volume(L) 0. 6 1. 1

Min. Fuel consumption(g/kw. H) 313

Engine model OHV25 Tilt single cylinder, forced air cooling. 4-stroke

Air clener model Semi-dry; Oil bath; Dual; Silent; Cyclone

Ignition model Transistor magneto

Startion model Recoil

N. W. /G. W. (kg) 31/33 48/50

Package dimensions(mm) 525x415x470

20FT volume(set) 280

Adhering to the 129-year-old tradition, our efforts and persistence make Rankuum Machine one of the top producers in the China market. Among all competitive products in the mainland China, the application of our pumps cover more than 85% of market share in photoelectric field; 35% in coating industry; 10% for industrial furnace and 5% for scientific research purpose in college institutions. We produce Turbo-molecular pumps, Roots pumps, Rotary vane pumps and Direct-drive Rotary vane pump which adopting production technology of Model DUO 0168B Licensed by Balzers Corp with good performance and competitive price.

MODEL: WM20X

Type: Self priming

Inlet/Outlet Size(mm): 80

Lift(m): 26

Suction(m): 5

Engine Model: GX160

Max. Power(kw): 3.1

Rated rotation speed(rpm): 3600

N. W(kg): 28.2

Dimension(L*W*H) mm: 515*410*460

This model use orginal HONDA engine. And also we can make waterpumps by our own engine.

Pump model: 4-stroke gasoline engine centrifugal pump

Inlet dia.(mm): 50

Outlet dia. (mm): 50

Max. lift head(m):26

Max. suction head(m):8

Max. capacity (m3/h): 25

Self-absorb time(s): 180sec

Engine model: OHV, 25. tilt, single cylinder, forced air cooling, 4-stroke

Bore*stroke (mm): 68*45

Displacement (ml): 163

Max. Output <kw/(r/min)>: 4.0/3600

Recommended max. output <kw/(r/min)>: 3.4/3600

Max. Torque (N.m/<r/min>): 10/2500

Starting system: recoil start

Engine oil designation: SAE 15W/40(GB11121-1995)

Fuel designation: 90#(GB17930-1999)

Fuel-tank capacity (L): 3.6

Engine oil capacity (L): 0.6

Dimension (L*W*H)(mm): 560*450*415

Net weight(kg):24

we offer various water pumps, engines, generators. be free to contact for more info. these products are with 3C, ISO9001:2000. CQC.