China Plastic & Polymer

This series include: GF reinforced PA1010 (PA1010G30), GF reinforced PA66 (PA66G30), GF reinforced PA6 (PA6G30), GF reinforced PA610 (PA610G30)

This series of products exhibit excellent mechanical properties, for instance, high modulus and rigidity, good wriggle resistance and high/low temperature resistance;

In addition, they benefit from low moisture absorption, low shrinkage when mould as well as good electric insulation.

This series of products find wide use to produce high performance components, such as electronic and electrical parts, auto and mechanical fittings, engine gear, and so on.

Pet Flake (IVY-PET-PJ001)

Product Name: Recycled PET scraps

Producing Area: Taiwan Color: Clear

Parameter: Check the sample

PVC food film

Material: PVC

Thickness: 10mic, 11mic, 12mic, 13mic, 14mic, 16mic

Specification: 500m(L)*350mm(w)*13micron

500m(L)*300mm(w)*13micron

Approval: FDA

OEM.

*Product: Eva Sheet

*Specification: A4, 50cm X 70cm, 70cm X 100cm

*Thickness: 1mm ~ 15mm

*Packing: as per yr requirement

*Quantity: 50 ctns per color

*Remark: Classified into Grade A, Grade B, Grade C, Of top quality and at reasonable price, many colors avaliable

*Please contact us to obtain more detail information.

Introduction:

PVC (polyvinyl chloride) Free foam board is a highly cost-effective PVC fine-celled plastic substrate with a matte finish closed-cell surface that is easily and quickly worked, sawed, bent, filed, drilled, planed, milled, screwed and polished.

Features:

1) Light weight compared with solid rigid PVC Sheet.

2) Low thermal conductivity, good insulation.

3) Resistant to chemicals and corrosion.

4) Absorbs vibration and oscillation.

5) Weather resistant.

6) Very low absorption of water.

7) Low flame ability.

8) Highly suitable for printing and foiling.

Applications:

Thickness: 1mm-25mm

Width: 1220mm, 1600mm

Acrylic (PMMA)

We warmly welcome all potential and existing clients to send us specifications and requirements, or please feel free to contact us with any questions or inquiries that you may have. We sincerely look forward to hearing from you.

Chlorinated Polypropylene (CPP)

PROPERTIES: Completely soluble in toluene and xylene. The solution has a good fluidty at room temperature. The material has very good weather resisting property, thermal aging resistivity, resistance to chemical attack, oil resistivity, ozone resistivity and fire resistance property.

APPLICATIONS: Mainly used as adhesive agent of printing ink and plastics paint. The area of their application is shown as below:

1. Used as adhesive agent of composite printing ink. It is available in producing the printing ink of biaxial oriental polypropylene(BOPP)that is used as packing film of candy and BOPP composite packing.

2. Used ad coating of BOPP film, adhesive of BOPP film & paper and the inner coating of pressure sensitive film made from BOPP.

3. Used in producing the coating of injection productions of PP mobile assembly, inner decorative material of house and industrial equipment.

4. This material is also can be used in the laminated board of PP film and aluminum foil, seal agent of jojnt of PP pipe, flexibility agent of PP fiber, adhesive agent of thermal bonding film and skidproof agent of PP packing.

PACKING: Cartons of 20kgs net each. QUANTITY: 1X20`FCL can load 9.5mts with pallet ( total 18pallets). Or about 11mts without pallet.

SPECIFICATIONS:

Appearance: White or Pale Yellow Granular

Viscosity (mPa. S): 200~800

PH Value: 6.0~8.0

Content of chloride (%): 28.0~32.0

Volatility (%): 0.5PCT

ASH: 0.3PCT

Note:

1. Viscosity is measured in 20% toluene solution at 25+/-1 C. Deg. By rotational viscometer.

2. Rotational viscometer is at 750 r. P. M.

LIGHTLEAD Photoluminescent Plastic Masterbatch is more easy to use in plastic production. LIGHTLEAD Photoluminescent Plastic Pellets are particularly for certain resins such as PP, PE, PMMA, PC, etc. By injection, extrusion and blowing molding, you can use photoluminescent plastic pellets directly to make luminous plastic products. Our standard percentage of the photoluminescent pigment in the photoluminescent plastic pellets is 25% and 50%. The brightness and afterglow time of your finished products could be adjusted by yourself by adding more resins into the compounds. In order to make your photoluminescent finished products get various colors, you can choose photoluminescent pigment in different colors. Otherwise, you can also use dyes/pigment to colorize it. But the dyes/pigment can definitely affect the brightness and afterglow time of the finished products. One with higher brightness and use light color dyes/pigment to minimize the loss of t he brightness.

Many customers like to use photoluminescent pigment directly. Some of them found that there is blacken phenomenon. If you have fewer knowledge of photoluminescent pigment, this blacken phenomenon is hard to solve. Finally, the appearance of the finished plastic products looks not very good. The photoluminescent plastic pellets and masterbatch could help you overcome this difficulty.

The photoluminescent pigment is in powder form but the photoluminescent plastic pellets and masterbatch are in granule form. L

Description:

Kaowool Paper is manufactured from high purity refractory fibres

and designed for high temperature insulation. Advanced production

techniques ensure uniform fibre distribution and close control

of thickness and density.

Kaowool Paper is produced from Alumina-Silicate fibres with the

minimum addition of carefully selected bonds, which burn out cleanly in service.

Features:

1. Good resistance to tearing

2. High flexibility

3. Low shot content

4. Precise thickness

5. Resistant to thermal shock

6. Very low thermal conductivity

Typical applications:

1. Insulating thermal break

2. Insulating gaskets

3. Expansion joints

4. Parting media

5. Die cut gaskets for domestic appliances

6. Thermal barriers for vehicles (silencers, catalytic exhausts and heat shields)

7. Molten metal seals and gaskets

8. Fire protection

Specification:

<table border="1" cellpadding="0" cellspacing="0"><td width="432" rowspan="2">main performane<td colspan="3">Brand<td width="40"> <td width="80"> <td width="72"> Classification temperature &ordm;C1100 1260 1 400Properties measured at ambient condition (23 C/50% RH) Melting point (minimum) &ordm;C176017601760bulk;Density (minimumkg/m3) &gt;210210210Chemical composition % SiO255-585246-52Al2O342-454748-54Other-1&lt;5

Polypropylene ( PP ) Fibre Monofilament Form

PROPERTIES:

Our PP fiber monofilament is produced by referring foreign advanced technology for fiber spinning, modified by adding functional additive and special surface-treating. Mixing into cement concrete, it has many advantages such as good dispersing, better water affinity, strong linking force. It is suited to reinforce and crack-resist to every kinds of cement concrete and mortar, specially used in engineering of building surface, floor, wall etc...

APPLICATIONS:

1. Function:

Resist to shrink & crack

Increase seepage resistance

Increase friction resistance

Increase freezing & thawing resistance

Improve tendons protection

Replace steel net (using in plastering)

Prevent mortar split and crackle expansion

Increase impact resistance and peeling resistance

2. The Feature of Polypropylene Monofilament:

A). No agglomeration and easily spread around in mortar or concrete. Guarantee the property of crack resistance effectively.

B). Apply conveniently. No need to change the proportion of mortar, and just put the fibers into the mortar mixture and stir for a moment after adding water.

C). Has fine economic property. The equivalent dia. Of polypropylene monofilament is only 0.02mm, so the ratio of dia. And surface is high and on the basis of crack resistance, it can reduce the amount (0.6kg/m 3 ) and cut down the cost effectively.

D). Be better to plaster. Because a great number of thin fibers spread into mortar evenly, so the plastering is much easier and this can improve the binding strength between surface and base.

E). The fiber has stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.

3. Suitable Engineering:

A). Suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.

B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.

C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.

D). Suit for any mortar projects and common concrete projects.

E). Highway, bridge and other roads.

4. Applying Instruction:

A). Dosage: For resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough, and for increasing reinforce and seepage resist application 1.8kg/m3 is enough.

B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely. Also it can be mixed with cement and other aggregates in advance, stirring by adding water at worksite before construction.

5. Brief specification:

Raw Material Polypropylene

Crack Elongation 20+/-5%

Fiber Type monofilament

Fiber Diameter 0.02- 0.05mm

Melting Point(Deg. C) 160 - 170

Density(g/cm3) 0.91+/-0.01

Acid &Alkali Resistance Strong

Tensile Strength(MPa) 450 min.

Length: 6, 10, 12, 15, 20, 24, 48mm

Water absorbency NO

PACKING: Normal packing is 0.6kg or 0.9kg a PE bag, and 18kgs/20bags in a carton. Also can be made as per customer`s request. Water soluble bag is available also.

Quantity: 400ctns/7200kgs/1x20`fcl without pallet. 930ctns/16740kgs/1x40`HQ without pallet. 756ctns/13608kgs/1x40`HQ on pallet.