China Paint & Coating

Product description

Widely use on the surface of glass. Comparing the glass which coats transparent heat-proof paint with general glass, the internal temperature will decrease 8-12 centigrade in the houses or cars with the treated glass. Except that, the coating film has remarkable characteristics of hard, adherence, flexible, water-proof, chemical causticity proof, and climate change resistance and heat-proof.

NO. Subject Test results Test standards

1 Paint appearance Blue sticky transparent solution Eyeballing

2 Deposited Stability degree 10 TB/T 6753.3

3 Paint color and Appearance Milk blue, transparent, GB/1729-79

leveling up, smooth

4 Fineness m 5 GB/T1724

5 Adherence CPS 1070 GB/T6753.4

6 Solid content % 50.30 GB/1725

7 Activity h 8 Eyeballing

8 Dry time

9 Surface dry min Minute 5 GB/T1728

10 Real dry h 168

11 Flexible Mm 1 GB/T 1748

12 Adherence (Carve) test 0 GB/T9286

13 Durable impulsion kg. Cm 50 GB/T 1723

14 Pencil hard H 3H GB/T 6739

15 Durable water 120h No dunk, no crinkle, no shedding GB/T1733

16 Acid endurance 3% H2SO4 h No dunk, no crinkle, no shedding GB/T 1763

17 Alkali resistance 3% NaOH h No dunk, no crinkle, no shedding GB/T 1763

18 Salt endurance 5%NaCI h No dunk, no crinkle, no shedding GB/T 1763

19 Heat-proof(120centigrade)2h No dunk, no crinkle, no shedding GB/T 1735

20 Durable Ultraviolet 8h No change Personal standard

Infrared heater

Model: SR-K1200

Technical specification:

Number of infrared tubes: 2- tube

Output power(adjustable):

-Full Type-1600W

-Half Type-800W

Timer Dial: 0-30 (min. )

Curing Time(min. ): 15-30 (min. )

Curing distance from panel: 300-500mm (118" - 197" )

Maximum curing height: 180cm (71 " )

Minimum curing height: 20cm (8 " )

Electrical specification:

220 Voltage, 50Hz, Single phase

Curing area:

120cmX65cm = 7800cm2 (47 " X25.6" = 1203sq. In. )

Features:

The high-temperature halogen lamps, unique reflector and lamp array are all positioned for absolutely uniform heat distribution over the largest curing area.

Produces the highest quality paint job in the least amount of time. Work is done at the lowest cost, while conforming to environmental regulations.

Automatic Timed Shut-Off: Reduces the chance of paint finish damage due to overheating.

Simple Controls: Easy operate switching, variable cure timer, and durable lamp and stand (post) construction with stable basement.

One section aluminum pole

Size: 2ft, 4ft, 6ft, 8ft

Out dia: 19mm

Thickness: 1mm

Two section aluminum pole

Size: 1-2ft, 2-4ft, 3-6ft, 4-8ft

Out dia: 22/19mm

Thickness: 1.5mm

Two section fiberglass extension pole

Size: 1-2ft, 2-4ft, 3-6ft, 4-8ft

Out dia: 32/25mm

Thickness: 1.9/1.2mm

We can supply various interior wall paint and exterior wall paint, our products have received by the beijing hotel, beijing subway, and peopel hall of China, and the embassy in China. Our products is health for people, so it is best seller in our country. The fuya paint have not karket in other country, I am sure it is importent for you, if you want have a best business in yours area.

SUNZO Nanometer Sulfur emulsion paint and Nanometer Sulfur Anti-germ wall paint are Hi-tech products developed by Sunzo company, cooperating with Chinese Geology University. Adopting the most advanced nanometer sulfur technique in the world, they have creativeness and preeminence in enviromental protection and capability. Nanometer Sulfur emulsion paint add on pure sulfur in dispensation of enviromental protection. It has outstanding function in inhibiting and killing bacteria, such as colibacillus and staphylococcus, etc. Making the air become fresh and clean. Nanometer Sulfur interior wall paint has advantages over others interior wall paint in degrading organic materials, abrasion-resistant, great hiding power and smooth hand-feeling. It's very suitable for decorating of cement, concrete and wooden wall. It's extensively used for varies of new or old engineering architecturals, such as government engineering, school, hospital, apartment building, etc.

The nanometer sulfur emulsion paint series

A. The nanomter sulfur Anti-germ matt interior wall paint

B. The nanomter sulfur Golden packing anti-germ matt interior wall paint

C. The nanomter sulfur purified air matt interior wall paint

D. The nanomter sulfur purified air semi-gloss interior wall paint

E. The nanomter sulfur health protection matt interior wall paint

F. The nanomter sulfur health protection semi-gloss interior wall paint

G. The nanomter sulfur alkali resistance primer

The nanomter sulfur emulsion paint:

(1) SUNZO Nanometer Sulfur emulsion paint

(2) Nanometer Sulfur Anti-germ wall paint

Technical parameter

Essential component: The nanometer sulfur element, pigment without lead, the acrylic acid copolymer emulsion, the water and the chemical additive and so on.

Science dilution: The clear water dilutes, adds water 10% for suitably, is highest does not surpass 30%(The volume compared to, concrete please take facilitates the construction as to be suitable, avoids excessively diluting affects the varnish film performance)

Coating area: 55-65 square meter/pot/level(Brushes spreads the theory value, is actual because the job practice and the surface roughness degree has differently)

Time for spread again: 2 hours (25 'c, standard by dry touch-feeling).

Thickness: Wet film is 80-100?m, dry film is 30-35?m.

Gloss color: Matte, white and according to the color cards of Sunzo construction coating.

About E-TIME building heat insulation paint

E-TIME developed a new type of building heat insulation paint, which owns the technology of the international top level. E-TIME building heat insulation paint is a new kind heat insulation material, its main metal atom material can reflect and transmit the heat from the wall surface; It means the wall will not absorb the most heat from sun. It can settle the heat insulation and heat preservation radically.

This product is water-soluble paint, it has the function of heat insulation and heat preservation, so it can energy saving and environmental protection. It can be used on residential building, factory and warehouse, etc.

This paint is a waterproof dope; Its rigidity is very high. It has the excellent characteristic of weather resistant, fireproof prevent the eroding of acid, alkali and mildew

It is water-soluble paint, it don't include benzene, ketone, ester, etc. It also don't include dissociative TDI, so it is environmental protection.

E-TIME building heat insulation paint has the advantage of low cost, construction convenient, etc. So it is the best choice than other high cost heat insulation materials.

Function and characteristic

1) Characteristic of E-TIME building heat insulation paint

E-TIME building heat insulation paint has the function of heat insulation and heat preservation

Heat insulation: The material of heat insulation paint can insulate the heat by heat reflection and heat transmit.

Heat preservation: The coat can prevent the heat discharge from indoor to outdoor, so it can preserve the heat.

2) Property of E-TIME Building Insulation Paint

E-TIME building heat insulation paint and base coat are all water-soluble product

3) Characteristic of E-TIME Building Insulation Paint

Gorgeous appearance, aging-resistant, waterproof, heatproof, weather-resistant and environmental protection, etc.

4) Characteristic of E-TIME building heat insulation material

(1) The building heat insulation paint has an extraordinary and imposing appearance, and can be replaced to spray different patterns and with different colors.

(2) Overall spraying or brush makes it has no seam and it is completely waterproof and prevent acid rain from eroding, and it is easy to wash as well as pollution-proof.

(3) Low cost for the material, wages, economy and not long time required.

(4) No any restriction for designing patterns, colors, the dimension, decoration and other arts application project, and it don't contain any bad materials, its very environmental protection

(5) The material is fade-proof, aging-resistant, waterproof, heatproof and weather-resistant. All these prolong the building's life.

5) Function of E-TIME building heat insulation paint

E-TIME building heat insulation paint has the functions of heat insulation and heat preservation. Therefore, it also energy saving and environmental protection.

Energy saving: When the coat thickness is 0.06mm, the heat reflection more than 84%, the heat transmit ratio more than 83%, it can reduce the 5 C-8 C indoors temperature, energy saving can reach 20%-40%.

Environmental protection: It is water-soluble paint, it don't include benzene, ketone, ester, etc. It also don't include dissociative TDI, so it is environmental protection.

Usage and application

1) Usage

Because of its prominent character and abundant colors, it can be used on the exterior wall of hotel, business building, villa, residential building, etc.

2) Application of E-TIME building heat insulation paint

It can be applied on any base level, include cement surface, only used by spray or roller, so its construction method is very convenience.

3) The lifetime of E-TIME building heat insulation paint

E-TIME building heat insulation paint will not fade and shed within 10 years.

Organ silicon flame-resistant heat conduction high voltage insulation coating

Characteristic and performance

The FR60 series organ silicon are flame-resistant the heat conduction high voltage insulation coating, which coordinate other polymers and the high performance material by the special organ silicon rubber but becomes through the polymer alloy technology preparation, has the following remarkable characteristic:

The insulation performance is outstanding, effectively ceases the transformer substation universal existence the micro-organism short-circuits the human body injury taken by breakdown and charged naked;

The heat conduction performance is fine, prompt releasing arrangement quantity of heat, prevents the heat energy accumulation and the hyperpyrexia, not flammable has from extinguishes the nature, is flame-resistant the effect to be remarkable, reaches the FV-0 level;

High strength, high adhesion, elimination coating and equipment air gap, Prevents the acid, the alkali, the salt and the atmosphere to the material corrosion;

Moisture-proof, hydrophobic water repellency, Bears the ozone, bears the ultraviolet ray, Bears the radiation, Bears the aging, May realize exempts the maintenance long period movement;

Its takes shape, the easy to operate, suits in the heterogeneous type equipment and the component surface protection and special electric contact spot insulation protection processing.

Qualification

This in view of the electricity, the electric power and the related profession to the equipment and the primary device insulation protection, the heat conduction, is flame-resistant with the heat resistance is moisture-proof and so on the request, drew up the enterprise standard "Organ silicon To be flame-resistant heat conduction High Voltage Insulation Coating Technical standard" (Q/SV 11-2001), The routine inspection and the pattern examine qualified (for details sees technical specification data sheet) completely.

Range of Application

It is suitable for losing in the electrical power Transmission system in the High Voltage the mother arrange, putting on the wall drive pipe, the high efficiency electrical machinery, the dry type transformer, the switch cabinet, outside the electric cable prime need insulates, the heat conduction, is flame-resistant, the moisture-proof protection equipment and the primary device, particularly in the electrical part which in contamination, in the moist environment.

This has the fine construction characteristic, Carries on to the geometry shape complex primary device surface spreads seals the protection effect to be remarkable, Its physics and chemistry target performance is better than hotly contracts the drive pipe.

Operation guide

To be spread the spot surface to carry on the convention to sweep clear, decontamination and degreasing, fat processing, keep its surface clean. This is the single component coating, even spread with the hair brush either the same tool spreads in is spread the equipment or the primary device must protect the

Spot. Spreads brushes one coating thickness is 0.5 millimeter generally, may according to the actual need, grasps spreads brushes the number of times and rubber thickness. The coating should leak proof spread, not dribble, does not hang the silk.

When the coating uncaps the use, if has not used up, should turn off the lid immediately, the seal preservation next time again will use.

Package, storage, and transportation

The product packing or models is packed in the airtight metal flexible hose, As storing maintains dry and ventilates, prevented all day exposes to the sun, the rain drenches. The storage period is 6 months, after surpasses the storage time, after duplicate examined qualified still may use.

Please accord to non- dangerous material storage and transportation.

Ningbo flying powder coaitng company is one of the newest powder coating factory producing different types items according to customers requirements, mainly including the following items:

1. RAL shade card (epoxy-polyester / pure-polyester)

2. Anti-corruption pure epoxy powder coating

3. Low temperature powder coating (140-160 degree )

4. High temperature powder coating (350-650 degree)

5. Hammerton powder coating (Silver, Bronze, copper, green, white etc. )

6. Color transparent powder coating(red, blue, green, gold )

7. Metallic powder coating ( Silver, gold )

8. Super thickness powder coating (30-40 UM)

9. Wood effect powder coating

10. Acrylic acid powder coating

11. Tribo powder coating

With excellent technology and powerful marketing group, we are ready to receiving your positive inquires and become our agent.

Our target: Lowest price, best quality, best after-service.

If you are interested in our powder, pls feel free to contact us through mail or tel/fax.

Our epoxy Floor resin mortar is a heavy-duty industrial-floor applicable to the requirements of high wear resistance, corrosion resistance, Ping is strong resistance to the anti-skid function. Applicable to the airport terminal, subway attention to appearance, durability place.

BLANC FINE™ BSP is a chemically synthesized barium sulfate product (BLANC FIXE) refined through special manufacturing processes with highly pure barium salt and sodium sulfate as its raw materials. Its grain sizes are under strict control in the course of reactions and synthesis and content of impurities is minimized. It features low specific weight, gentle and stable nature, narrow distribution of grain sizes, extremely good light fastness, weathering resistance and other outstanding chemical properties.

The uniquely spherical or near spherical (D97<1. 2um )ultra-fine barium sulfate crystal grains of BLANC FINE&#8482; BSP are provided with big specific surface areas, thereby effective increasing or magnifying the light reflecting area in coating. Therefore it is widely applied in the formula system of high-gloss products.

By using its own ( 15g / 100g ) low oil absorption, BLANC FINE&#8482; BSP may be fully mixed with other resin components, i. E. The same equivalent weight of resin may carry more BLANC FINE&#8482; BSP. In particular, it gives a vivid color, repeatable tint and perfect surface gloss when compounded up with pigment in a formula. Its low consumption of base material guarantees the high rheological property in system and good mechanical property of finished products. Even in a formula system with low resin content, a product appearance with optimal evenness can be formed, thereby saving expensive resin by a part. This embodies the cost effectiveness of using BLANC FINE&#8482; BSP and greatly facilitates your advantages of costs. On the contrary, when barium sulfate has a relatively high oil-absorbing index and there is no adequate resin base material to coat and bond pigment particles, the resin base material fails to moisten all pigment particles so that they loosely distribute in coating, resulting in deterioration of coating quality.

BLANC FINE&#8482; BSP may be used for thermoplastics to improve the rigidity, hardness and abrasion resistance of plastic products.

The relatively high thermal conductivity and rheological property of BLANC FINE&#8482; BSP are helpful to the reduction of injection molding period of plastics. BLANC FINE&#8482; BSP can also improve the degree of crystallization of thermoplastic macromolecule so as to enhance the strength (especially the impact strength at low temperature) and geometric stability.

BLANC FINE&#8482; BSP is approved for the product subject to contacting food due to its nontoxic property. BLANC FINE&#8482; BSP conforms to the Europe 's purity requirement and U. S' codes of food and drug administration. LD5 (Mouse, oral administration) >15,000mg/kg; Dust limit=6mg/m 3.

After a series of chemical treatment reactions, BLANC FINE&#8482; BSP has real pure barium sulfate content as high as 98%. It is insoluble in acid and water and shields ultraviolet radiation and other hazardous rays from penetration. Therefore it is widely applied in the products having strict requirement for high weathering resistance without causing discoloring or chapping.

The brightness over 94 and near spherical crystal shape of BLANC FINE&#8482; BSP make it easier to well distribute in each corner in formula, thereby achieving a dense, exquisite, tough and smooth product appearance of uniform color. In Mohs hardness 3, BLANC FINE&#8482; BSP carefully protects your machines and equipments from the increase in load and heavy wear due to the filling of a large amount.

BLANC FINE&#8482; BSP is free from impurities hazardous to elastomer. Hence BLANC FINE&#8482; BSP is particularly suitable to the filler for elastomer. Its other advantages include outstanding rheological property, low abrasiveness and high chemical purity.