China Other Pump & Vacuum Equipment

Product description: Gear Pump

For Caterpillar

7S4627

3N2078

3G4768

3P4002

3P6814

3P6816

...

For Komatsu

07430-72203

07433-71103

07432-71203

07432-72103

705-21-32050

07444-66103

175-13-23500...

The High-efficiency Solar Water Pump-Product Introduction:

The solar pump can be also called solar water pump. Solar pump makes use of the solar energy to pump, clean, no pollution, simple and convenient. It solves the problem of agriculture irrigation, people's and livestock's water supply and frontier defense sentry water supply in the region where there is no water and no electricity. This product can automatically work at sunrise and stop at sunset without manpower. It is a high-technology green product with credibility and environment-protected. And systems are easy to install, PV pumping system can be connected to existing wells and pumps or installed quickly in new well. The technology is very easy for most wells and much deeper well to apply.

Technology Data performance(-Battery Operation)

Type SD-7 SD-13

Power(W) 70~120 110~180

Vol(V) 24 36

Lift(m) 10~40 10~40

Water Flow(m3/h) 0.7~0.5 1.1~0.8

Example Day work hour(h) 5~6

Day water flow(m3) 3.5 5.5

Package(cm)(L*W*H) 48.5*31*16.5

Weight 6.5 kg

Pump(cm)(L*D?*pD?) 40.2*?7.5*2

Controller(cm)(L*W*H) 16*12*7

Solar modules(WP) 160 240

Option Parts CABLE(m) 10 10

WATER PIPE (m) 10 10

Gel Battery 12V 60-65AH 12V 60-65AH

Unit Price FOB Shanghai: 1848.74 USD 2290.17 USD

Caution: The quality standard is in accordance with the industry standard and the product is a patent device. This pump can be used for High Mountain, fishing, farm, family and so on.

Work temperature. +1.0 C degree -+50 C degree

Controller temperature: -10.0 C degree-+50 C degree

The mini work D?: 100 mm

Please check the water nature and environment, to maintain the purity of water, no impurities.

ALL Warranty

2000 hours or 1 YEAR limited guarantee to keep in good repair, or contrived broken, if not contrived broken, it can work more 2 years.

Remarks

The quotation contains Solar PV panels, Deep Well Submersible DC Pump, controller, steel frame, pipe, but without Battery, and water tank etc. Accessories. It is the representative case; We can provide the pump system according to more wide height and different flow request.

Following is a brief introduction of pump performance characteristics include the following:

1. And centrifugal pump (pump milk): Centrifugal pump because of its simple structure, low cost and has been widely used. Pump million compared with the following main points with distinction:

A) pump is a positive displacement pump with 10, 000. Transportation can be more accurate flow control variables can also be made to facilitate the pump. And the output is beyond the control of the centrifugal pump, with the decline in the increase of resistance: 10, 000 with a strong self-priming pump, and the centrifugal pump to be in full operation before the liquid.

B) with the pump speed low, generally between 200rpm to 600rpm. Output has been steadily materials were delivered and its components will not be jeopardized. And high speed centrifugal pumps, the delivery of materials subject to powerful centrifugal force of the impact and role Therefore, a constant source of energy of the material delivered mixture of different ingredients, the quality of the products. And 10, 000 use the pump is the best choice to solve this problem. So it is particularly applicable to transportation and even mixture of solid particles containing materials.

C) pump can be used for the transmission of high viscosity material, known as colloidal pump. And centrifugal pump could not.

D) pump can be used to facilitate the export of manufactured pressure higher species such as 1.5MPa. Quantitative suitable for long-distance transport or high resistance.

E) pump used to produce more complex precision, high cost, it is also the greatest disadvantage compared with the centrifugal pump.

2, and screw pump (MC Pump): For the same two-volume pump Therefore, its performance is similar-can smooth high-viscosity material, have higher transportation pressure. But the greatest flaw in the decision of a screw pump in the health requirements of the non-applicability of the occasion - because of the screw-sculptured surfaces and the many resident chamber decided it will not become a health pump. Wall tetrafluoroethylene or rubber materials to be delivered more likely to transfer material damage caused by pollution. And 10, 000 use the pump rotor and the rotor chamber Streamline basic structure is not dead spots and non-metallic pieces. Therefore, strictly speaking in food and beverages, pharmaceutical, and other industries with high health requirements, with 10, 000 more suitable pump application Especially now increasingly high degree of automation of the production line. Meanwhile more and more use of CIP-line (local) cleaning This demonstrates that the use of pump selection million importance.

Transmission: Rotor pump rotor pump drive generally follows form one. Motor + 7.2 reducer: This set of simple transmission, rotor speed is constant. A decision is not adjustable flow. If you think the role of governor allocated converter can be achieved. 2. Electrical machinery friction + CVT Transmission: This depends on the speed manual adjustments to achieve its features are safe and reliable. Adjustable 0.71 level. Shortcomings in non-automatic adjustments more difficult, the operating speed the process, not a state governor in the stands. 3. Frequency Converter: + motor speed automatic adjustment can be realized in this way, is a free flow adjustments. The advantage is a higher degree of automation and easy to operate. Inverter drawback is the higher prices, smaller low-speed torque.

Application of pump rotor brief:

1. Beverage categories: Dairy foods, latex, chocolate syrup, cheese wort, beer, soft drinks

2. Fruit concentrates: Pudding, jam, jelly, tomato sauce

3. Paste products: Fats and oils, etc.

4.: Facial cosmetics, detergents, hair gel, aromatic oils, etc.

5. Drug categories: Extract, emulsion, etc. Pills Pulp

6. Chemical Industry: Dye, fat solvents, and polymer resin

230 Volt 50 Hz

All items have TUV approval

All electronics are insulated and are varnished for use in wet environments

All touch pads are fully potted for use in wet environments

Electronic control board is in an IPX5 housing

Size TP series 44.25*44.25 mm height above bath 3 mm

Size TPE series 44.25*44.25 mm height above bath 4 mm

HOT PUMP WITH ONE AIRSWITCH

Air switch control for pump and heater.

Press the air plunger This will turn the pump on and when water flows out of the jets, the heater will be turned on. The heater will maintain slowly increase the bath water temperature.

A red button at the back of the pump is the thermal cut out switch. If the temperature of the bath water becomes too warm, the thermal cut out switch will disconnect the heater. This is a very rare occurrence. To re-start the heater, the red button has to be pushed hard.

HOT PUMP WITH TWO AIRSWITCH

Air switch control for pump.

Air switch control for heater.

Press the pump air plunger This will turn the pump on.

Press the heater air plunger This will turn the heater on. The heater only be turned on if the pump is running.

A red button at the back of the pump is the thermal cut out switch. If the temperature of the bath water becomes too warm, the thermal cut out switch will disconnect the heater. This is a very rare occurrence. To re-start the heater, the red button has to be pushed hard.

MZA MZE MZAO type pump refers to overseas advanced technology, adopts API610 and VDMA24297 criterion, highly effective and saving energy new production.

MZA MZAO type pump, the pump body is supported by feet.

MZE type pump, the pump body is supported centrally with cooling circle.

MZA, MZE type pump is close type impeller.

MZAO type pump is open type impeller.

They are suitable for chemical industry, chemical fiber, salt making industry, alkali making industry, ocean Engineering, petroleum, smelting industry etc. Transporting all kinds of causticity liquid, MZAO type pump is suitable for containing solid grain, suspend grain and easy to crystal grain medium.

Technical Data:

Flow range 5.5-2600m³/h

Stroke range 16-250m

Working pressure: MZA, MZAO type 2.5MPa, MZE type 5MPa

Working Temperature -80~450ºC

This kind of pump is single stage, horizontal, radial dissection volute pump. The pump is held up by divergent legs. It is single inhale radial dissection impeller, axial inhale, radial discharging. You could use front, back seal airproof ring and balance hole for hydraulic equilibrium. Stuffing box has cooling or heated tie-in. Gland seal uses packing seal, single head face or double head faces mechanical seal is also good. The pump circum gyrate by clockwise according to drive end. Bearing is cylindrical roller bearing and centripetal force bearing, engine oil for lubricating.

Material of pump: 304, 304L, 305, 306, 307, 316, 316L, 904, 941, 904L, Ni Cr alloy, CD4Mcu, steel, Cr28, Cr30 and titanium alloy.

Rated power output of solar panel: 8 Wattage

Maximum Water Lift Height: 1. 8 Meters

Maximum flow rate: 660 Litres per Hour

Suitable for different types of water features such as small water displays, fountains, waterfalls

* The solar pump is with flow adjuster, you can adjuster the water lift height freely

** The solar panel is fixed in a 33*25cm Aluminium frame with ground stake, easy to fix.

-Using the latest brushless motor technology, and with ceramic axis inside, running steadily

-Large input grid, wide applicability

-Easy to set up, without the need for batteries or wiring installation

-Running from solar energy, free cost and environmental

-Running in the direct sunlight automatically, free maintenance

-Replace conventional electric pump with this solar pump kit to make your garden more environment-friendly, portable and safe

ZZ LPG Nozzle

ZZ LPG Nozzle with thumb release is designed for the Italian-Type coupling. This style is the most convenient for use of the locking LPG Nozzle. All ZZ LPG Nozzles are manufactured on engineering specifications for refueling safety and efficency.

Features:

User Friendly One-Stroke Operation: The whole refueling operation is started by simply pushing nozzle to the receptacle with a squeeze of the hand.

Nozzle Lock: The nozzle is locked safely onto the refueling position until trigger on the lever is pushed to release to stop refueling.

Hammer-Lock Technology Superb Durability: Designed specifically to resist frequent coupling and uncoupling.

Ergonomic Design Insulated Handle: Protects operator from temperature effects created by high-flow LPG gas. Minimal force required to engage nozzle.

Tough Construction: Heavy-duty brass, aluminum and stainless-steel structure provides first-class corrosion resistance in the harsh refueling environment.

Convenience of Use: Apply a single plane 360 degree inlet swivel.

Safety of Use: The nozzle will not fuel gas until safely pushed onto an appropriate receptacle.

Individually Leak Test and Inspect: Test and inspect with traceable serial numbers.

Replaceable Rubber Cover: Deflects venting LP gas away from operator hand.

Viny Hand Insulator: Protects operator from temperature effects created by high-flow LP gas.

Materials:

Body: Aluminum

Internal Components: Brass and Steel.

Seals: Specially formulated polymers and elastomers specific to LPG applications.

External Components: Aluminum, Stainless Steel and Brass.

The company occupies a floor space of 290, 000 square meters and has more than 2, 300 staff and workers. It owns fixed capital of 230 million Yuan(RMB), total asset of 410 millon Yuan(RMB)andover 1200 main processing equipment including 68 NC machine-tools and machining centers. In 1980, it introduced technology for manufacturing high performance hydraulic valve from Vickers of U. S. A. And that for making pin type vane pumps from Atos of Italy; In 1993, the company set up Yuci Yuken Hydraulics Co., Ltd. And Yuci Yinan Hydraulic Pump Co., Ltd. Respectively with Yuken of Japan and Yinanlian Co. Of Hong kong in the way of stock holding by China side; In 2001, set up Yuci Hydraulics Co., Ltd.

Details:

Vickers Vane pump

V10 V20 20V(Q) 25V(Q) 35V(Q) 45V(Q)

Caterpillar Vane pump

3G7658

3G7655

1U3953

3G2834

3G7657

3G2234

9J5070

9J5058

Vickers Vane pump

421592-L

421574-L

421586

421240

421955

416437

Caterpillar Cartridge Kits

3G7658

3G7655

1U3953

3G2834

3G7657

3G2234

9J5070

9J5058

Vickers Cartridge Kits

421592-L

421574-L

421586

421240

421955

416437

Gear pump for CAT (Caterpillar) D7G \D6D Bulldozer &988B wheel Loader

2P9239 3P6814 3P6816 3P0380

Caterpillar Pumps

9J5050 9J5070 9J5053 3G7640 9J5075 9J5048 3G5810 9J8182 9J8195 3G7636 9J5080 9J5051 9T0486

Brief Introduction

KPS Series Pumps are the newly developed pumps of Kenflo, featured as single stage double-suction centrifugal pump. The use of 3-D solid model (CAD) Computer Aided Design and (CFD) Computational Fluid Dynamics is involved in the KPS pumps, ensures high efficiencies, energy saving, low impulse, low noise, robust and durable, convenient maintenance. Its constructure featured by single stage, double suction, horizontal split casing and sustained at two ends of pump shaft.

Suitable Applications

KPS is used for handling clear water or the particle free liquid, short fiber contained weak corrosive liquid. It is widely used in pressure boosting, fire service applications, air conditioning systems, engineering water circulation, cooling system, boiler system, commercial irrigation, irrigation works, especially for Water plant, Paper Mill, Power plant, Thermoelectricity plant, Steel mill, Chemical plant, Irrigation. When coated with SEBF or constructed of 1.4460 two phases stainless steel, it can even handle sea water or some other corrosive mediums.

Design Features

Pump casing-highly efficient volute casings, with flanges rated to GB/T 17241.6 PN 1.0 MPa(10bar): With a nominal head< 95m; While flanges rated to GB/T 17241.6 PN 1.6 MPa(16bar): With a nominal head locates between 95m and 130m; When flanges rated to GB/T 17241.6 PN 2.5 MPa(25bar): With a nominal head> 130m; And the flanges can be coupled with the coequal, which are in accordance with standards of BS 4504: 1989, ISO 7005.1: 1992, DIN 2533: 1976, ISO 7005.2: 1988;

Shaft seal- single action or double actions high quality mechanical seal and gland packing available.

Equilibrium- The impeller treated with G6. 3 dynamic equilibrium is a common choice, when the rotor to be run at speed of two polos speed (with a synchronous speed of 3000rpm), G6. 3 dynamic equilibrium to the whole rotor is compulsive.

Impeller- two-way flow, symmetrical constructure, low impulse, optimized hydraulic characteristic.

Coupling-diaphragm-type coupling, make up the disalignment of the two center lines, high driven efficiency, vibration free operation.

Pump shaft-two-sided drive, the custom can decide which side would be the driven side according to the placement.

Bearing-Heavy duty NSK or approved equivalent.

Materials-No.35 cast iron, No. 5 cast iron+SEBF coat, 1.4460 two phases stainless steel, more details are displayed in<>followed.

Compact design and light weight for easy handing.

Closed coupled with diesel or gasoline engines.

Aluminum precision molded pump housing

Fitted into a robust roll-over frame

Large fuel tank for hours of continuance operation.