China LED Lighting - Page 211

Specification:

1) Outer material: PC

2) Diameter: 30mm, High: 85mm

3) Light source colour: Red, yellow, green, blue, white, warm white, RGB

4) LED quantity: 12PCS

5) Wattage: 0.5W

6) Viewing Angle: 120 degrees

7) Working Voltage: 220V, 110V, 12V

8) Work Temperature: 25-45 degrees

9) Base: E27, E17, E12, E14

10) Packing: color box

Usage: Extensively applied in lighting for advertising lighting, rainbow bridge, construction building, house fitment, stage

Material; Glass

Color; White, red, optional

Working voltage; 12VDC/110- 220VAC

Power; 0.8w, 1w or 1.5w

Color Temperature; 3000K~6500K

Led quantities; 12, 18, 24 pieces

Working Temperature; -20-80

Packing; Color box.

1. External Dimension: 1500 x 1000 x 60mm;

2. 5"LED, character displayed in lattice 8*16 at ?5;

3. Screen is controlled by key-pressing and remote controller;

4. "Ill Type" displays in figures and letters and is input through key pressing or remote controller;

5. "Scheduled Output" is set by the production chief through key pressing or remote controller;

6. "Current Output" is the quantity actually achieved, which is automatically got by totalizing the input counting signals;

7. "Remaining Quantity" = "Scheduled Output" - "Current Output", which is calculated automatically by the screen;

8. Screen is able to retain the data during power-down;

9. Operation Environment: Temperature: -10oC - 50oC; Relative humidity: 0-95%;

10. Power Supply: AC180 - 250V.

Working Principle:

This product adopts the principle of monocrystal silicon PV solar panel and solar energy for power generation, recharge the built-in 700mAh/4.8V NI-HI battery, the storage power then be used for lighting and flashing, it also can recharged the mobile phone with charging cable.

Functions:

1. Recharge the built-in 700mAh/4.8V NI-HI battery by solar energy.

2. LED lighting: 1LED on -3LEDs on -3LEDs flashing-off for a circle

3. The built-in NI-HI battery can charge mobile phone directly also with an indicator lighting when charging.

Use method:

1. Three charging models(charge by solar energy)

Charged by 1 pcs solar panel: Showing the solar panel as picture A, Then Put the front of it under the sun light to charge built in battery.

Charged by 2 pcs solar panel: Showing the solar panel as picture B, Then put the front of it under the sun light to charge built in battery.

Charged by 3 pcs solar panel: Showing the solar panel as picture C, Then Put the front of it under the sun light to charge built in battery.

2. Lighting

LED lighting model: 1LED on -3LEDs on -3LEDs Flashing-off for a circle.

3. Recharge mobile phone:

Open the DC socket cover, insert one end of charging cable to products socket and plug opposite end to the mobile phone, then the built-in battery can charge mobile phone directly, the indicator will light when charging, more charging current more bright.

Note: If the mobile phone can not be charged, that means there is not enough power of NI-HI battery. At this time. The NI-HI battery must be recharged by the original electronic power firstly.

Cautions:

1. Avoid pointing the light at eyes

2. The pin must be inserting to the socket properly otherwise the electronic circuit will be disturbed.

3. This product is for emergency use only.

4. Strictly using the specified mobile phone cables to charge mobile phone, otherwise the mobile phone or its battery will also be damaged.

Yiwu City Guolin Graftwork Factory was built in 1998. It is one of the factories that early produce LED flashlight. Our factory mainly produce LED aluminum alloy flashlight, LED key lamp, money-checking machine, and so on these seriesof electronic gift products.

* 1W 3 LED Headlamp

* 1 pc 1W and 3 pcs high intensity LED

* Adjustable Inclination

* Requires 3*AAA 1. 5V size batteries

Cover material: Glass

Low power dissipation: 1W

LED quantity: 3 SMD LEDs

Color: Warm white (3000K-3500K); White (6400K)

Operating voltage: AC90V-250V

E27 socket

LED bulb source life: More than 80, 000 hours

Product Approvals: CE

Capable: GS, UL

Brand Name: ZC

Features:

1) Battery type: 3XAAA"4.5V"

2) Light bulb: Ultra is bright 4 LED

3) Material: ABS Plastic

4) Packing: Double blister, white boxes

1. This product adopts four pcs piranha LEDs as its luminous body. Wires come out

From the bottom of module. These LEDs are set evenly and closely on the board,

In this way, the module could achieve very high intensity.

2. The LEDs of this product are from famous international company. The luminous body

Is of very high intensity, large viewing angle, good quality and stability.

3. ABS housing filled with epoxy can achieve waterproof rate IP 68.

4. Available Color: Red, Yellow, Blue, Green, White, Warm White, etc.

5. Consumption Watt: 0.48W/PC

6. This product could be widely used on channel letters, signs, logos, etc.

7. Package: White box

Description:

1. Produce name: Led net light

2. Size: 2m*0.5m / 2m*1m / 2m*2m / 3m*3m / etc.

3. Voltage: AC110V / AC220V / AC240V

4. LED color: RED: 625nm / 400mcd / 120degree

YELLOW: 590nm / 300mcd / 120drgree

GREEN: 515nm /800mcd / 120degree

BLUE: 465nm / 300mcd / 120nm

5. LED quantity: 64led/ squaremeter

6. Package size: 20set /case

APPLICATION:

Holiday light; Building light; Garden light; Other celebration locale.