China Construction Materials Stocks

Specifications:

1) Dimensions (W x L): 500 x 970mm, 500 x 1,000mm, 500 x 1,970mm, 500 x 2,000mm, 500 x 2,500mm

2) Thickness: 27mm (special thickness available according to clients' requirements)

3) 9mm for each layer, made of mountain fir with a closed middle layer

4) Core: Chinese fir

5) Glue: melamine

6) Face and back: WBP glue with yellow color

7) Moisture content: below 12%

8) Application: concrete forming for construction

9) Advantage: anti-abrasive, winkles-resistant and anti-erosive

Packing:

Plastic or requested by clients

Product Feature:

Size: 1220X2440X3mm, 1220X2440X4mm.

Max width: 1550mm.

Max: Length: 6000mm.

Paint: PVDF or Polyester (famous brand) Normal PE core or FR (Fire resistance) PE core (Standard: B1).

Color: Custom & special (see color chart).

Aluminum thickness: 0.12~0.50mm (Mainly 0.12/0.15/0.18/0.21/0.30//0.40/0.45/0.50).

Panel total thickness: 3mm(interior, polyester or PVDF) or 4mm(exterior, polyester or PVDF), etc.

Product Specification / Models:

1- PVDF 3 coats made by Shenzhen Huayang(We have 5 coating lines in our factory. ) thickness of paint 28 - 29 um, paint made by PPG INDUSTRIES, INC.

2- Aluminium coils made and SouthWest, Chongqing.

3- Protective film made by Novacel, France.

4- PE particle made by Qilu, Shandong.

5- Jesus adhesive made by SK Korea, more than 90 degree.

6- back painted.

7- peel off intension more than 9.5 Newton.

8- surface level: Best.

9- quantity each month: 80, 000 S. Q. Meter.

Application

- Exterior wall of buildings.

- Curtain wall.

- Interior wall.

- Desk and shelf for exhibition.

- Renew and redesign the exterior wall of the old building.

- Billboard, signboard, markboard, advertisement panel.

- Industrial material, the cold storage vehicle.

- Balcony, unit of equipment, indoor partition.

Application:

It is mainly used as substrates for water-proof roofing materials and joint materials. It is characterized by high tensile strength, corrosion resistance, dimensional stability, warter resistance, high porosity and easy stauration by bitumen and joint compound. The longitudinal strengh and tear resistance can be improved further by incorporating reinforvements into the mat across its whole width. Perforated mat is also available when the mat comes out from a particular punch process.

Standard weight:35g/m2,40g/m2 and 45g/m2.Standard roll size:50mm*25m/roll, 50mm*90m/roll.

PACKING Rolls to be put into plastic bag,then to be put into carton.

LEADING TIME Within 25 days after your prepayment.

SHIPPING PORT Shanghai port, China

Product name: Aluminium alloy railing

Model: 2006FB, 2006HB, 2006BB

Instruction: Four ways of surface treatment of Aluminium series:

A. Gold dust

B. 2# Sapeli

C. Red walnut

D. Archaized cupreous

Persistent treated color above.

Geosynthetic clay liners (GCLs) are an established sealing product in the geoenvironmental industry. They are used in landfill caps and base liner applications under roads, railways, secondary containment for above ground tank farms, as well as within various other containment structures such as dams, canals, ponds, rivers and lakes. They are also used for waterproofing of buildings and other similar structures.

Rolled out like a carpet to provide a durable impermeable liner, geosynthetic clay liners consist of a layer of high swelling sodium bentonite, sandwiched between two geotextiles. By different techniques, manufactured GCL, taishanshen, is mechanically bonded by needlepunching from one nonwoven geotextile through the bentonite to the other nonwoven or woven geotextile.

Sodium Bentonite is a naturally occurring clay with hundreds of uses. Comprising mainly montmorillonite, a layered clay mineral with broad flat platelets which are ideally shaped to provide a hydraulic barrier. Sodium ions located between these platelets allow water to hydrate the bentonite in an absorption reaction that results in the bentonites swelling characteristics. Swells when contacted with water approximately 900% by volume or 700% by weight. When hydrated under confinement, the bentonite swells to form a low permeability clay layer with the equivalent hydraulic protection of several feet of compacted clay.

This swelling allows the bentonite to seal around penetrations, giving the GCL self sealing characteristics. During hydration, a confined layer of dry bentonite changes into a dense monolithic mass with no observable individual particles. A fully hydrated sodium bentonite layer can have a hydraulic conductivity of approximately one hundred times lower than a typical compacted clay liner (CCL).

Because of their low hydraulic conductivity, GCLs are used mainly as a replacement for thick, difficult to build, compacted clay liners to provide a barrier to liquids and gases.

Permathene supply and install a range of GCL's from light to heavy grades. These are high performance environmental liner comprised of geosynthetic carrier components integrated with a layer of low permeability sodium bentonite. The rolls are supplied in wide widths, minimising seams. Installation is fast

Product Composition: "Coolgoal" Solid Phenolic Core Panels are composed of melamine-impregnated decorative surface papers superimposed over a varying number of Kraft phenolic core sheets to achieve a desired thickness. Decorative surface papers may be used on both sides of the panel, or one side may be sanded for bonding to a suitable frame.

Recommended Uses: "Coolgoal" Solid Phenolic Core (SPC) Panels are produced in various thicknesses adequate to preclude the use of a substrate. They are useful where flat, freestanding panels are needed for decorative and/or functional purposes. toilet and dressing room partitions, instrumentation panels, workbenches, shelving and tabletops; casework, furniture surfacing applications and interior doors.

Panel size: 4'x 8', 4'x10', 4'x 12', 5'x6', 5'x 10', 5'x12', 6 'x6'

Thickness: from 3mm to 30mm

This kind of centrifugal glass wool felt is soft, fine, waterproof and fireproof with good rebound elasticity (veneering like reinforced aluminum foil can be applied). It is provided steel structure construction with an ideal heat preservation and sound absorption effect. It can be cut at random in construction by requirement, and is mainly used for shock and sound absorption inside rooms and of sound system, traffic vehicles, refrigerators, appliance, etc. To achieve a good effect.

The aluminum foiled glass wool felt possesses slight radiation resistance as excellent inner lining of high-temperature workshops, control rooms, and inner walls, compartments and ceilings of computer rooms or factory proof with steel construction.

Specifications:

A- Glass wool felt

1) Volume intensity: 10-72kg/m3

2) Thermal conductivity: 0.037W/mK (depend on the relative thickness)

3) Thickness: 25 - 150mm

4) Width: 1200mm

5) Length: 3-20m

B-Glass wool board:

1) Volume intensity: 24 - 96kg/m3

2)Thickness: 25-100mm

3)Length: 600mm-2400mm

4)width: 600mm-1200mm

5) Diameter of fiber: <6um

5) Temperature for safety use: -120C-454C

C-Glass wool pipe

1)Intensity: 30-100kg/m 3

2)Diameter of inner piper: 22-1220mm

3)Thickness: 30mm-100mm

Executive standard of glass wool seris: 'GB/T13350-2000 DL/T776-2001

Executive standard of rock wool seris: GB/T11835-98 DL/T776-2001

Executive standard of Aluminium silicate: GB/T16400-1996 DL/T776-2001

Approval with the GB/T19002-1994 -ISO9002: 1994 Standard

HLT brand Aluminum honeycomb composite panel is made from aluminum honeycomb core and face aluminum panel through PVDF coating and the back aluminum layer adhesive together. On the basis of the high technic, our panel has advantages of superior-flat, light weight, good rigidity and so on. And used as the exterior wall (especially for high-rise building) decoration, interior wall ceiling, space separation, room door, heat preservation carriage and billboard etc.

Specifications:

1) Panel thickness: 10mm, 20mm, 25mm, 30mm, 35mm

2) Size: 1,200 x 2,500mm (or according to clients' demands)

Packing: Wooden case

We are one of leading companies in Xiamen, handling natural stone products. To increase competitive ability, we are always trying to find more new material. Now we are manufacturing and exporting black basalt lava with small holes with high quality and competitive price.

Any other natural stone and products are available, such as granite, marble, sandstone; Countertop, vanity top, pavers and so on.

If any interest, please contact us without hesitation.

Plywood For Concrete Formwork:

Core: Poplar/ birch/ pine core/ birch face and back

Poplar core/ poplar with birch

Layer: 9~13 layers

Glue: MR/WBP

PSF: Black or brown, 120~180g/m2

Grade: AAA

Specification: 915mmX1830mm, thickness 9~27mm

1220mmX2440mm, thickness 9~27mm

1250mmX2500mm, thickness 9~27mm