China Car Maintenance - Page 91

MCU controlled Interface for Mercedes Benz Carsoft 7.4 which is compatible with the original interface.

MB Carsoft 7.4 Interface Multiplexed

OBD2 connection cable (all K-Lines wired)

MB 38 pin connection cable (all K-Lines wired)

MB Sprinter connection cable (all K-Lines wired)

MB 3 pin banana cable

RS232 extension cable

Interface contains Multiplexer to connect to all diagnosticable Modules fully automatically.

Status Led's for Power, MCU and K-Line status

Aluminium casing

DB37 connection to vehicle

Includes ALL cables including even Sprinter cable

All cables with a length of 1, 5 metres

ML BENZ Key Programming Device and Software for the models ML from 1998 to 2004 with the metal key(not the plastic electronic key). The Device can program two new key when all keys lost. The programming is done via the diagnostic plug OBD II and takes 8-10 seconds. For programming you must use our special transponder, specially made for the key programming

GUIDE

Device is tested with all types of Mercedes-Benz ML from year 1998 to 2004

1. Turn the ignition ON with new transponder (transponder must be near to ring coil) -> instrument cluster will display

2. Connect key matching device to OBDII socket RED led will becomes light, and GREEN and YELLOW will becomes blinking

3. Green and yellow leds will blinking up to 4 seconds and will becomes dark transponder is matched to the car

4. Switch ignition OFF and then again ON you can start engine

Using this device OBD-P558 you can read the security Login Code for VAG Cars who are made starting +/- June 2000 to year 2004 and who are using ImmoBiliser System 3 and Immo2. Codes from some car models after June 2000 can be read from Instrument Cluster too, but some Instrument Clusters are very hard to access and to read, or they must be scanned before getting access to the Cluster. Well, it will take too much time and sometimes it can be impossible i. E. Audi A4-2001+ (All remaining by OBD. )

AUDI A6 1.8

AUDI A6 1.8T

AUDI A6 2.4

AUDI A6 2.8

BORA 1.6

BORA 1.8

BORA 1.8T

BORA 1.9TDI

GOLF 1.6

GOLF 1.8

GOLF 2.0

PASSAT B5 1.8

PASSAT B5 1.8T

PASSAT B5 2.0

PASSAT B5 2.8

POLO 1.4(Not Compatible)

POLO 1.6 (Not Compatible)

AUDI A8 3.0

AUDI A8 4.2

Introduction

MB STAR realizes all the functions of official factory BENZ Star2000 from OBD factory: Reading out and erasing trouble code; Reading the real-time data of sensor and actuator; Coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to Sep. Of 2007, can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.

Configuration

OBDfactoryMULTIPLEXER 16+PIN OBD II cable 38+PIN cable 14+PIN cable 4+ pin cable RS232 communication cable (navigation port)

Optional Configuration:

1. IBM laptop: Such as 600E, T20, T21, T22, T23, T30...With COM.

Testable system

ENGINE

AUTO-SPEED

AIR CONDITIONAL SYSTEM

SRS

ABS

ASR

MPL

GM

BENZ ORIGINAL ANTI-THEFT DASX SYSTEM

KEYLESS ENTERING SYSTEM

OBD-II SYSTEM

Other new system, 100% as same as original diagnostic Star 2000.

FUNCTION:

Reading trouble code

Erasing trouble code

Live-data, adaptation

Component testing

Maintenance information consultation

Component location diagram

Wiring diagram.

Coding the new ECU...

DAS:

Concise interface and straightforward operation with IBM high-quality computer can realize the quick and accurate code reading and the whole car system testing.

WIS:

Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.

Star finder:

OBDfactory component location diagram for colorized.

Language:

English, Chinese, Japanese, Korean, French...We can setup the languages for you.

Car Washer NE-310A

This product usage direct current 12 V automobile orders the high pressure of the smoke machine power supply to clean machine, is provide to clean an automobile to use, can also go together with the 12 Vs of the production of use our company multi-function meet an emergency power supply to clean for the family, the company clean and then hold usage.

Structure characteristics:

1. This product adoption humanization design, use the magnetoelectricity machine to always drive a high pressure pump. As a result physical volume some weights is light and turn soon and quickly, the pressure is strong, structure tightly packed, function stability, take convenience etc. Advantage.

2. Product the main parts adopt a superior quality always the magnetoelectricity machine and the ABS engineering plastics pump body, all do not embroider a standard piece of steel, each high new product of material with all carefully selected and high-quality parts.

3. The product usage change to deal with contact quickly, operate very convenient.

4. Clean machine to have an automatic pressure switch, as long as the water gun doesn't spray the water electric motor and work, then the economy water electricity avoids machine exhaust again.

5. The electric motor inner part had a hot protection a machine, being electrical engineering an usage time lead long electrical engineering over hot protection machine would automatically break open(a consecution usage about 30 minutes), after needing the electrical engineering cooling use again.

6. Clean the machine weight originally is the suitcase type lightly, can put into the automobile empress tail box, or the home is anyplace.

Main technique parameter:

Model number: NE-310A

Power: 120W

Electric voltage: 12V

Electric current: 10.5A

Discharge: 6.5 L

Artillery range: 8M

Absorb a distance: 4M

Weight: 5.8KG

Shape size: 460*130*355mm

Main technique parameter:

Model number: NE-310B

Power: 120W

Electric voltage: 220V/50Hz

Electric current: 5A

Discharge: 6.5L

Artillery range: 8M

Absorb a distance: 4M

Weight: 5.8KG

Shape size: 460*130*355mm

The product is the equipment to inflate the tyre automatically, and it is connected to air compressor. When the tyre pressure arrives at the pre-setting value(such as 2.1bar), it will automatically stop.

Power Supply: AC 220V/50HZ

Input Air Pressure: d10kgf/cm2

Pressure Output Range: 1.5~9.9kgf/cm2

Accuracy: 0.01kgf/cm2

Dimension: 35*35*120cm

Packing Size: 35*20.5*110cm

Gross Weight: 17kg

Packing: Carton

Feature:

1) ribbed sure grip handle

2) sponge on the brush can clearin faster and easier

Packing:

Measurement: 45.5 x 36 x 32cm

G. W. /N. W.: 14.5/12.5kg

Our factory is located in Shanghai, China. We can produce all kinds of balancers. What we stress most is the quality of our products and our after-sales service. The quality of our products are among the leading rank here in China. If you do have interest in our products, please do not hesiste to contact me.

Our company mainly products high pressure cleaner, it mainly used for cleaning all Kind of automobile, motorcycle, etc. They also can be used to clean house, hotel, Marketplace, and etc. Our cleaner have attractive appearance, high standard In quality.

Taizhou wuzhou company. Sincerely hope you to be our ideal trade companion.

This production is confected by advanced fsi technique, and is a kind of super lasting high quality crystalline hard wax which contains pure natural plant palm glossy and moist component, can quick and easy removal of stains, blemishes and paint flecks, renew the car body and keep it original longer than general by double protection. A lustrous protecting exterior continues.