China Car Maintenance - Page 8

BDM MPC555/6

The ECU must be removed from the car and is programmed by special spring contacts without soldering on the circuit board. This method is used for example if a car has no connection from the OBD connector to the ECU or for very new ECU versions. The best tool for this is the BDM 100

Which way of programming is used, depends on manufacturer, model, year and the ECU type in the car. Generally we use the easiest way of programming. So if a car can be programmed by the OBD port, we will do it this way.

After the security entries for the OBD2 programming get more and more difficult, a new possibility has come up for chiptuning of ECUs with Motorola MPC555 - 565.

This generation of Motorola processors contain 448KB - 1MB Flash memory. That memory cannot be read and programmed with an eprom programmer. Therfore it is possible over the so called BDM interface, which must be implemented on every ECU board. For that purpose there are mostly 10 solder pads on the PCB.

Alternative there are ECUs with 12 or 14 solder pads, which can be supplied with operating voltage over these pads.

The BDM100 connects these solder pads of the BDM port with the WinOLS PC over the USB bus. The BDM100 gets its operating voltage from the USB bus. The ECU needs its own supply voltage of +12 volts.

The BDM100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).

The BDM100 requires the ECU to be open, on the bench, as the reading/programming operations are realized by linking a flat cable to specific area the ECU (the tool, on the other side, is linked to the USB port of a computer).

It allows also to create perfect copies of the whole software of an ECU (after having read the original ECU software).

The software allows to read and program the WHOLE ECU content of:

* 29BL802 SSOP eprom file (or ROM memory with maps if eprom physically not present);

* MOTOROLA MPC5xx Processor file;

* Serial Eprom content.

Please note that even in the case of the ECU blocking, due to the wrong checksum recalculation, the ECU can always be reprogrammed and then retrieved (if the original software has been previously stored).

Product name: Star 2000 DAS+WIS+EPC

Star 2000 DAS+WIS+EPC

Star 2000 DAS+WIS+EPC

Star 2000 DAS+WIS+EPC

New! ! ! ! !

Product Description

PC Based Mercedes-Benz Diagnostic System WO/Laptop

Introduction

MB STAR realizes all the functions of official factory BENZ Star2000 from OBD factory: Reading out and erasing trouble code; Reading the real-time data of sensor and actuator; Coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to July of 2006(Many other's just can update to May of 2007), can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.

Configuration

OBDfactoryMULTIPLEXER

16+PIN OBD II cable

38+PIN cable

14+PIN cable

4+ pin cable

RS232 communication cable (navigation port)

Optional Configuration:

1. IBM laptop: Such as 600E, T20, T21, T22, T23, T30...With COM.

Testable system

ENGINE

AUTO-SPEED

AIR CONDITIONAL SYSTEM

SRS

ABS

ASR

MPL

GM

BENZ ORIGINAL ANTI-THEFT DASX SYSTEM

KEYLESS ENTERING SYSTEM

OBD-II SYSTEM

Other new system, 100% as same as original diagnostic Star 2000.

FUNCTION:

Reading trouble code

Erasing trouble code

Live-data, adaptation

Component testing

Maintenance information consultation

Component location diagram

Wiring diagram.

Coding the new ECU...

DAS:

Concise interface and straightforward operation with IBM high-quality computer can realize the quick and accurate code reading and the whole car system testing.

WIS:

Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.

Star finder:

OBDfactory component location diagram for colorized.

Language:

English, Chinese, Japanese, Korean, French...We can setup the languages for you.

Renault CAN Clip is a comprehensive diagnostic tool for Renault cars.

Features:

Clip's menu allows seeing all the information relating to the vehicle

Computer test

Automatic test of all computers

Reprogramming

Airbag test

Scan tool (OBD tests)

Base Doc (access to Technical Notes)

Physical measurements

Antipollution

Multimeter.

Set includes:

Can Clip interface

2 cables for CAN Clip (car connection)

1 cable for Can Clip (PC connection)

1 software CD.

Versions we offer now: Renault Clip v79 (can be installed on any PC); Reprog v60.

It's very simple to diagnose a vehicle using Renault CAN Clip Diagnostic. Interface: Just select the vehicle make, enter the V. I. N. And press ENTER.

Product Features

Large LCD display for easy reading

Mini-size and lightweight

Can be attached to key ring. It's a good choice for promotion

Single key operation, manual ON/OFF, unit conversion, auto power off

Four kinds of units in measuring pressure: PSI, Bar, Kgf/cm2, Kpa

One CR-2032, 3V lithium battery can last 24 months

Main Technical Variables:

Range: 0-100PSI; 0-7. 0Bar; 0-7. 0kgf/cm2; 0-700Kpa

Resolution: 0. 1PSI; 0. 01Bar; 0. 01kgf/cm2; 1Kpa

Accuracy: +/-1%

Operation Temp.: -20-60º C

Weight: 40g

*Notice

" Weght" item numerical value:

301-43g

302-41g

303-46g

471-32g

472-40g

353-45g

Dexin industrial Co., Ltd is a manufacturer specialized in various type of tire repairing patches and tools like tubeless tire patch, tire seal, vulcanizer tire glue, radia tyre patch, dias tire patches or others.

The rubber slice patch(vulcanizer tire seal strip) with 20cm long long, you could choose the thin one or thick one.

For more information about our rubber patch repair kit series please visit our site.

Packing

: 20x15cm x 35g (thermal bond)

: 50pcs/canister

1Litres water can wash 1-2pcs car. 13Litres liquefied petroleum gas liquefied petroleum gas can wash 70-80pcs cars.

Washing your car with a single cup of water! Nowadays, number of automonile is increasing in developing countries and scale of car washing market is growing to gigantic level. Existing car washing facilities requiring a lot of water must need high maintenance cost. Authorities concerned would control on purification facilities of waste water with strict regulations. Now you can meet our new patented technology. Steaming car washer can satisfy

consumer and operator.

Specification:

Working Pressure:<=0.8Mpa

Hydraulic Test Pressure:1.2Mpa

Charge Voltage: 220V

Charge Time: 6Hours

Water Consumption: 0.06L/min

Liquefied Petroleum Gas Consumption: Warm-up State: 0.0104L/min

Normal Working:0.009L/min

Water Tank Cubage: 18L

SE-50A is a kind of sprayer for precision mechanical and electronic equipment, can be used to clean mechanical and electronic equipment. The equipment can be cleaned directly in the work-site without disassembling them. If necessary, can clean the equipment with low voltage when the equipment is running.

Feature

Odor: solvent odor

Intensity of Withstand Voltage: above 25KV/2.5mm

Flammability: non-flammable under formal temperature

Use Property

1. Good Electroinsulating Property: It can be used for cleaning low-pressure mechanic and electronic equipment that cannot turn off.

2. Good Degreasing Capacity: It will remove grease, dust and moisture that lead to an abort easily from mechanical and electronic equipment. It will also work for the place that hand cannot reach.

3. No Residue After Dried-Up: This is a precise solvent-type detergent that will volatilize and cleanse thoroughly and left no residue on the surface of product after dried-up.

4. Safe and No Corrosion: No corrosion to metals, paints, insulation materials, oil resistant rubber, etc.

Usage

Widely applied to clean generator, motor, transformer equipment, electrical appliance controller, electric welder and power station, transformer station and the industry of petroleum, chemistry, metallurgy, machinery, mining, etc.

Executive Standard: Q/SDOK.J.01-001-2001

Package: Packed in the sprayers, net weight 400g, 12 sprayers/carton.

Please Contact us into sanda477 at yahoo.com.cn directly. Tks.

Model: EGRCC0028

Size: 44x35cm(17.32x13.78inches), or 44x38cm(17.32x14.96inches), can be customized.

Material: PE foam coated with aluminum on both sides.

Packing: 120pcs/ctn(meas: 60x35x50cm(23.62x13.78x19.69inches), g.w: 12kg)

Printable with any design

Description:

Orbita design, direct drive

Dc 12v, 5a, 2800rpm

7" foam pad

Charging time: 5-7hours

Shell made of hi impact abs

Packed in box

Accessories include: Two ni-cd battery(1200ma), one adatpor, one charger base,

one foam pad