China Car Glass & Window

We have Laminated glass and Tempered glass (both flat and curved) for these purposes. The production facilities and equipment are imported from world known glass production line suppliers (Finland, Belgium and etc. ).

Products have already been sold to over 30 different countries around the world. The feedback of our products is exceptionally good.

We have windscreen/windshield, rear windscreen with/without heaters, door glass and so forth for models, such as:

Toyota - Nissan - Mitsubishi - Honda - Lexus - Mercedes Benz - BMW - Saab - Daewoo - Hyundai - Kia - Isuzu - Hino - Iveco - Scania - Leyland - Bedford - Volkswagen - Rover - Suzuki - Subaru - Volvo - Alfa - Audi - Citroen - Opel - Porsche - Jaguar - Renault - Peugeot - Fiat - Rolls Royce - Ferrari - Ford - Daihatsu - Mazda, American DW and FW windshields, Australian Holden - Falcon windscreens and etc...Models from year 1960s' to the latest 2000's, you name them, we probably will have them. Heavy-duty vehicles (excavators, cranes, bulldozers) glass such as for CAT series, KATO series, PC series, EX series and so forth are also available.

Our products have obtained the U. S. DOT Standard (DOT-637), the United States FMVSS 205, the Canadian CMVSS 205, the European ECE regulation number 43, E-mark Standard with number: E1 43R-001664, as well as the China Standard (GB-9656-96, CCC), for safety automobile glass.

RH08series is a single component polyurethane sealants of high modulus, moisture curing, weatherproof, waterproof, low temperature resistant and anti-aging properties. It can be used for assemble and reparation of windshield glass, back window glass and side window glass for automobiles.

ADVANTAGES

Single component, convenient for application;

Slight or no volatile, environmental friendly;

Excellent resistance to aging;

High adhesive performance and excellent sealant performance;

Non-corrosion to substrates;

No shrinkage

Tack free and no sag

High mechanical performance

TACHNICAL DATE

Appearance paste;

Tack-free time 1-45 minutes;

Curing time 3-5 mm pr 24 hours

Elongaton at break >500%

Tensile strength >8.0mpas

More specific performance see our Datasheet

The window closer is made of plastic material, which is used into auto parts of window.

We are capable of providing plastic, silicon mold and fnished products which covers Auto parts, Communications, Alloy, Connector, Rubber &Silicone by adopting high-tech, including plastic mould making, plastic injection mold, secondary processing, metal stamping, die cast tooling service.

Size of screen: 6"

Screen: TFT LCD TOSHIBA

Dot pitch (mm): 0.339 x 0.359

Resolution: 400 (h) x 234(v)

Contrast: 350: 1

Brightness: 350cd/sqm

Response time (ms): R: 30/F: 50

Viewing angle: U: 40/D: 55, L/R: 55

Adjustable items: Brightness, contrast, color, sharpness and volume

Video input: 1VP-P

Color system: PAL, NTCS (SECAM can be made to order)

Power supply: DC+12V

Power consumption: About 10W

Picture mode: 16: 9

Light sources: CCFL

Lamp life time: Over 10,000 hours

OSD menu language: Chinese, English

Dimensions (W x H x D): 175*126*23mm

Net weight: Around 0.4g

Color: Black

Operation temp: 5- 40 degree

Storage temp: -20- 60 degree

Blue screen: Blue screen when no signal

Function: AV or AV&TV.

Others: Backsight camera input, special glass can be used as a mirror when no picture.

1. LH is electir and defroster, RH is electric and defroster and sensor temperature take

2. Color: Black, with admoring cover

3. Packing quantity: 12pcs

4. Packing carton specification: 73x30.5x51.5cm

5. GW: 15.6KG

For all of the Peugeot 405 rear view mirror series, the RH mirror is CONVEX, and the LH mirror is HYPERBOLOID.

This product has the ability of filter intense light, and reduce reflect light:

When driving under intense sunlight or at night, sunlight and the intense light reflecting on regular rear mirror, driver will feel dizzy. Blue lens has the ability to absorb intense light and reduce reflecting light. It can make the vision clear and soft, reduce the eyes fatigue, and effectively ensure safety driving.

Ultra wide vision, no blind area, and make the driving safer:

Double curvature blue lens add one more curvature on the original wide-angle lens, so it can widen the vision field and eliminate blind area. You are clear at a glance on the rear reflector, and do not need to look around, so it can reduce metal fatigue and guarantee the safety driving

Specifications for Circular Fresnel lenses -wide angle window lens

Size: 190mm x 240mm

Thickness: 1.2mm

Material: Soft PVC

Groove pitch: 0.5mm

Focal Length: -300mm

Wide-angle window lenses show obstacles hiding out of sight. Product is packaged with an open window so the customer can see through it. Easily applied and removed by hand using water only.

A clear wide-angle rear window fresnel lens is a thin flexible negative fresnel lens which adheres instantly with water to the rear window of your vehicle to provides driver a increased angle of full view. The lens enable you to actually see many objects under the rear window you can't not see through inside and outside rear view mirrors.

Use the rear window fresnel lens, you can avoid accidents due to the children, pets and other low-lying objects in blind spot behind your vehicle while backing up. The lens can also be applied on a side window for larger vehicles to aviod squeeze accidents

Feature of wide angle rear window fresnel lens:

* Easily applied and removed by using water only

* No tools required

* Need no adhesive, just water only

* The lens is better working for vertical rear windows

* The lens can be cleaned with water

How to install?

* Apply the quality lens to the inside of the rear window near the botton edge.

* Make sure window is clean, then wet it with water

* Apply smooth side of lens on the inside of window

* Remove air bubbles from the lens

* Press firmly in place for a few seconds.

* The lens will turn crystal clear in 24 hours.

* Lens will stay on until be peeled off about 6 months later, then reuse the lens again

Our products are employed with float glass from foreign joint venture or foreign owned venture in China like Pilkington Shanghai, and also the imported PVB from Sekisui Chemical Co., Ltd (Japan) and also Du Pont U. S. A...We are also one of the oldest windshield manufacturer in China with more than 10 years experience of manufacturing and exporting.

Benefited from steady & reliable quality, high resistance for impacting and the character of no injury to person after broken, all of the specifications of our products have reached the international standard. Now we have already gained the European Safety Glass Standard ECE-R43, American Safety Standard of DOT, Chinese Safety Standard of GB9656-2003 and the ISO9001-2000 certificate.

Currently we have already developed 800 different models of laminated front windscreen. Most of the products were exported to Canada, USA, Australia, Ghana and South Africa etc. And become the designated supplying factory of several automobile manufacturers in domestic.

Xiamen Shunfa Glass Product Co., Ltd is a highly sophisticated manufacturer of safety laminated and tempered glass, located in Xiamen Special Economic Zone, China. We can provide you windshields with good quality, good pricing and good service. We have Laminated glass and Tempered glass (both flat and curved) for these purposes. Automotive Glass - Used in jeeps, cars, trucks, LCV's, bus body and ships.

Ningbo Zhenhai Wanjia Car Motor Plant is a high-tech enterprise in the district. It is located at Zhuangshi town industrial park in Ningbo. The main products are electric glass jack assembly and motors for car, with tens of specifications. It is the first rate supplier for the domestic car manufacture. The plant has a strong technical team capable of research and development on their own. It owns advanced production and testing equipment and the key processing equipment is imported from Japan, such as full automatic multiple position balancing machine, full automatic coiling machine, glass jack testing table, etc. At present, the plant is carrying out the second stage technical reform according to the development trend of the car market. It plans to levy 100 mu of land in the industrial park and build a production base for annual output of 500 thousand set of jacks and 2 million motors.