IP Camera (IP2031)

Product Description

IP Surveillance Camera with Angle Control and USB Webcam Server

IP camera with USB webcam server. Camera's movement and zoom can be remotely controlled through the network or internet with the software provided. Other users can view the pictures at the right IP address, and this can be password protected. Images are bright and clear, and the camera is solidly built. Necessary cables and software are provided.

China Manufacturer specifications

# Easy installation for users of all levels with iCAMView Utility (a step-by-step installation wizard)

# View images from your web enabled PDA

# Monitor multiple IP Camera using iMultiView(a Windows based freeware)when you make a purchase

# Flexible Motion Detection and Image Recording functions

# Email notification for Motion Detection, daily report, etc...

# Configure up to 4 viewing time frames (Permit Hours)

# Able to display multiple images on a single screen

# Support up to 30 simultaneous remote viewers per USB camera

# Display viewers IP, account, viewed camera, login time and total downloaded bytes

# Detailed event log with listing options

# Detailed event log with listing options

# Event listing by Level and Type

# Limit the max FPS to each of the 8 user account

# Number of Viewers control per USB camera (max of 30 viewers/camera)

# Block / black-list up to 256 IP addresses from accessing IP Camera

# Schedule up to four time slots when motion detection is active

# Upload motion detected images to a specified FTP server

# Schedule up to two time slots for image forwarding (to email or FTP server)

# Update firmware directly from IP Camera webpage

# Save current settings to a file making settings recall easy

1. IP CAMERA is connected to a Router/IP share and Cable/xDSL modem to stream video to the internet. This is the most common configuration where a Router is used. The Router Port Forwarding has to be configured to allow Public access to IP CAMERA.

2. IP CAMERA is connected to a HUB and a Cable / xDSL modem. In this setup, the user will need to setup PPPoE within IP CAMERA. Enter the username and password as provided by the ISP to allow IP CAMERA to dial-up to the internet.

3. IP CAMERA is connected directly to a Cable / xDSL modem. Similiar to configuration above, the PPPoE section in IP CAMERA will have to be configured to allow access to the internet. In addition, the user will have to setup a DDNS account (choose from the list provided by IP CAMERA Setup Wizard)

Model: IP2031

Unit Price/Payment:T/T

Origin:China

Packing:Carton