China Building Steel & Structure - Page 6

1) Thickness:0.25 - 1.8mm

2) Width:400mm - 1250mm

3) Thickness tolerance:± 0.02mm

4) Width tolerance:± 5mm

5) Zinc coating:100 - 150gsm

6) Surface treatment:Chromate, oiled/unoiled

7) Surface finish:Regular spangle, minimized spangle, zero spangle

8) Steel grade and standard:JIS G3302, Q195, EN10142, ASTM89, ASTM95

9) Packing:Seaworthy packing

10) Applications:Widely used for roofs, outer walls, ovens, explosive-proof steel, electrically controlled cabinets, and industrial freezers in the residential and industrial building material fields, galvanized wire steel tapes, other fields

Ceiling T grid:

1) To fix mineral fiber board or PVC laminated gypsum board and other Ceiling board.

2) Available models:

A) 32H Model:

I) Main tee: 32mm x 24mm x 3.0m, or 3.05m, 3.60m, 3.66m

Ii) Cross tee: 26mm x 24mm x 1.2m, or 1.22m

Iii) Cross tee: 26mm x 24mm x 0.6m, or 0.61m

Iv) Wall angle: 20mm x 20mm x 3.05m, or 3.60m

22mm x 22mm x 3.05m, or 3.60m

24 mm x 24mm x 3.05m, or 3.60m

V) Thickness: From 0.23mm, 0.25mm, 0.28mm, to 0.30mm and 0.40mm

B) 38H Model:

I) Main tee: 38mm x 24mm x 3.0m, or 3.05m, 3.60m, 3.66m

Ii) Cross tee: 26mm x 24mm x 1.2m, or 1.22m

Iii) Cross tee: 26mm x 24mm x 0.6m, or 0.61m

Iv) Wall angle: 20mm x 20mm x 3.05m, or 3.60m

22mm x 22mm x 3.05m, or 3.60m

24 mm x 24mm x 3.05m, or 3.60m

V) Thickness: From 0.23mm, 0.25mm, 0.28mm, to 0.30mm and 0.40mm

C) 32H Model(9/16):

I) Main tee: 32mm x 14.5mm x 3.0m, or 3.05m, 3.60m, 3.66m

Ii) Cross tee: 32mm x 14.5mm x 1.2m, or 1.22m

Iii) Cross tee: 32mm x 14.5mm x 0.6m, or 0.61m

Iv) Wall angle: 20mm x 14mm x 3.05m, or 3.60m

V) Thickness: From 0.23mm, 0.25mm, 0.28mm, to 0.30mm and 0.40mm

D) 38H Model(9/16):

I) Main tee: 38mm x 14.5mm x 3.0m, or 3.05m, 3.60m, 3.66m

Ii) Cross tee: 38mm x 14.5mm x 1.2m, or 1.22m

Iii) Cross tee: 38mm x 14.5mm x 0.6m, or 0.61m

Iv) Wall angle: 20mm x 14mm x 3.05m, or 3.60m

V) Thickness: From 0.23mm, 0.25mm, 0.28mm, to 0.30mm and 0.40mm

Delivery time: 15days after your deposit

OA intelligence network steel floor

Characteristics

1. Type: FS668, FS800, FS1000

2. Size: 500mm*500mm*28mm

3. Concentrated load: 300kg, 363kg, 453kg

4. Convenient in installing and dismantling.

5. Able to have a lower laying height with the lowest height of just 50mm.

6. Comfortable and steady, characterized by its capability of absorbing sound, insulating heat and fireproofing.

7. Provide with flexible network layout

8. The carpet laid on the surface of OA500 network floor can be choosed according to the samples.

Application

Suitably used in intelligence buildings, office buildings, teaching buildings and modern office rooms.

OA500 intelligence network raised floor technical parameter

<table width="75%" border="1"><td colspan="2">Type<td rowspan="2">Size(mm)<td colspan="3">Concentrated load<td rowspan="2">Utmost limit load (N)<td rowspan="2">Uniform load(N/M2)InternationalNational standardLBNKGFS668HDG500 28QG500*500*28 668 2980 300 7886 12585FS800HDG500 28BG500*500*28 800 3550 363 9400 14680FS1000HDG500 28ZG500*500*28 1000 4440 453 11970 16960</table

Note: The carpet laid on the surface of OA500 network floor can be choosed according to the samples.

WE PRODUCE Sandwich panel, Composite panel, color steel boards Series: Such as

Exterior wall panel,

Interior wall panel,

Woodfiber cement panel,

Floor panel,

Curtain panel,

Furniture panel,

Brickwork,

Tuopan,

Engineering flameretardant paper,

Colorful contour plate,

PU (Polyurethane) color steel sandwich panel,

Color steel fence,

Color steel board,

Profiled steel plate,

Aluminium composite panel.

External heat preservation system of exterior wall,

Energy-saving house system,

Steel-wool composite sandwich panel,

XPS panel,

Colored steel-phenolic foam sandwich composite panels,

Metal sandwich panel,

Structural insulated panels (SIP),

Coated steel fence,

GLASSFIBER REINFORCED PLASTIC SHEET,

FRP PLYWOOD,

Refrigerated truck boday panels,

Structual insulated panels(SIPS),

Thermo-clad.

Picket fence (Metal),

Steel barriers

POLYCARBONATE PANEL.

Service Programs:

1. Distributition: China standard Hot-rolled H beams(6-12m)

2. Fabrication And Distribution

A. Welded H beams (High-frequency welding and automatic submerged arc welding)

B. Kinds of Structural steel framings, such as box beams, box columns etc. We can supply the processing of welding, cutting, bending, drilling, blast cleaning, painting etc. According to the drawings

Keyword index:

China manufacturer of finished steel products used in steel framed building, heavy industrial steel structure construction, steel structure engineering and project, China supplier of steel members or steel structural members welded by any combination of section steels, steel plates, steel tubes or steel pipes, according to the drawings. Such as steel sheet pile, steel H girder and steel H pillar, structural steel box cross beam, structural steel box column, langspan or shortapan steel girder or joint. China manufacturer of steel support structure of industrial mill plant, prefabricated steel structure of power station, structural steel bridge. China supplier of heavy Steel timbers, steel members, steel elements and prefabricated steel components of industrial steel infrastructure.

We supply miscellaneous steel fabricating service, including main body welding, stiffened plate welding, motherboard welding, cutting, bending, drilling, painting etc. Our factory covers 100000 square meters, annual output is 40000 tons, ISO 9001 certificated. The most important thing you should make clear is that when import many kinds of China raw materials you need pay 5% to 10% added tax, but if you import fabricated steel structures, you needn't pay the added tax. So our superiority is low raw material cost and low fabrication fee.

All tubes of Verticals & Horizontals are high strength grade at size 48.3x3.25mm.

The ring plates are at 10mm thickness.

The ends on the Horizontals are casting steel.

All tubes of Braces are high strength grade at size 48.3x2.3mm. And the bolts are high strength grade.

All items are at hot-dipped-galv. Finishing, unless specified.

Packing: In bundles. If using scrap steel material for packing, free of charge. But if using racks/basket, need to pay the cost of rack/basket.

Loading: 15-22 tons/20' if used scrap steel material. 16-23 tons/40' if used racks/basket.

Bechim Industry Co., Ltd. was consist of several casting , machining plants and one seal workshop ,Its professional on machining and casting Including investment casting, sand casting, die casting and mechanical seal industry with best service.

The products include following items:

Groove type piping connection, Ductile Iron Pipe Fittings and valve.

Manhole Cover & Frames

Forged Carbon Steel Flanges

Investment Castings, sand casting, die casting.

Agricultural Castings

Vehicle , Tractor, Auto part,

EPDM, Silicon rubber, Nit rile rubber gasket ring.

Flexible (expanded) graphite sheet (rolls),

Reinforced graphite composite sheet,

Flexible graphite packing ring.

Reinforced graphite gasket.

Spiral wound gasket, gland packing etc.

We have won a high reputation among home and abroad clients for its good quality, accurate shipments and reasonable price. The trade clients are from USA, Canada, Europe, South East Asia, South America, Japan, Korea and Hong Kong etc.

To satisfy the customer is our target. It runs through every link of the production. Please do not hesitate to contact us if you are intersted in our products, and we will give you a quick and satisfied reply.

(1)Core Material: Rock Wool, EPS OR PU;

Surface Materials: Galvanized Steel sheets or Pre-painted Steel sheets.

(2)Wall Thickness: 40, 50, 60, 80, 100, 120, 150, 180, 200, 250mm

(3)Max. Width: 1000mm, 1200mm

(4)Length: According to client's demands, engineering requirements and shipment conditions

(5) Application: Manufacture the cold storage, cabinet or the temperature preservation box for the transportation condition, ceiling & wall, partition wall

(6)Characteristics:

* With light deadweight,

* Save the time limit for a project

* Non-burn or hard-burn materials, satisfy the fireproofing criterion request

* Manifold disquisition and oversea used approving more than 40 years. By special coated dispose, the color coated steel panel's guaranty is 10-15 years, and the panel's life express 35 years by painting the antisepsis material after each 10 years

* Pressing steel panel with the clear line and many colors for choice, and suit with different building style materials, achieving the satisfying effects.

* Sound insulation intension can be 40-50dB, it is the most effective sound insulation material

* Pressing steel panel can be arbitrariness incise, it can satisfy the especially design demands

* Use the high strength steel panel for the base metal (contradict open and pull intension 5, 600kg/cm2), adding the most advanced design and roll pressing moulding, it gets the best structure character

* Improves speediness and springiness designs according to clients' requirements

Features:

1. Light character- the construction cost can be reduced considerably 2. Simple installation-the construction time limit can be shortened 3. For the panels easy cutting, arbitrary dimension and temperature preservation and insulation, it has various usages.

Suitable structure style:

Tier and highrise commercial and residential buildings, shopping malls and highrise garages and so on.

Characteristic & Virtue:

It mainly featured a frame structure with DECK-RC floor plates. This structure provides highly flexible and spacious room. This structure is normally made of various lightweight metals or nonmetals. Compared with reinforced concrete structures, it enjoys many advantages, including low investments, shot constrution schedule, limited impacts on the environment, etc.

Throughout:

2000 Metric ton per month

1)Component Size:

Full range of both metric and inch normal size and special specification products as per your requirements.

2)Steel Material Grade:

Q235B, Q345B, SS400, A36, A572, A992 Gr50, S235JRG2, S235JR, S275JR or S335JR, etc.

3)Fabricate Standard:

GB50205-2001, JIS, ASTM, EN, etc.

4)Service:

We can provide you with a complete set of service from quota, design, manufacture and installation, according to your requirements we can design according to your plan, or according to by your drawing. The manufacture procedure including drilling, rust-removing, shot blasting, nondestructive detecting, painting, etc.

More detailed information will be available on your requirement.

Tangshan YueFeng steel Co., Ltd. & HuaKai industry and trade Co., Ltd. Are that one collects sinter, smelt iron, steel-making and steeling rolling for an organic whole, which is produce 1,000,000 tons of iron per year, 1,000,000 tons of steel, 800,000 tons steel products of medium-sized iron and steel Joint Enterprise, have total assets of 500 million yuan, 2,100 workers were. The company has already passed ISO9001: 2000 international quality system authentication, March of 2005 is chosen as national large-scale enterprises of township enterprise by national Ministry of Agriculture.

The company lies in the Fengnan District of Tangshan, with the harbour of Tianjin, and Jingtang harbour were neighbor, The south only 40 km away from Caofeidian Da Gang, have the advantage of Neighboring the port. Domestic have Beijing-Harbin, Beijing- Qin railway, and the Beijing-shenyang, Tangshan-Tianjin expressway cross border, 4 kilometers from the south of Tangshan to Tangshan-Tianjin expressway, traffic is convenient, the geographical position is superior.

The company inherits the Management principles: " produce up-market, sincerity management, improve customer satisfaction: Manage strictly, innovate in an all-round way, strengthen the core competitiveness " leading product angle steel series sell well the whole country more than 20 provinces, cities and regions, export to such countries as Russia, U. S. A., Iran, Iraq, Vietnam, Indonesia, etc., have good market reputation and influence power.