Beijing Construction Machinery

CABR coupler and machines for rebar

Coupler: Parallel Thread Rebar Splicing with Cold Upsetting End

Principle:

1. Enlarging ends of reinforced bars by cold upsetting;

2. Threading parallel threads;

3. Splicing rebars by coupler (connector).

Features:

Coupler/High splice strength, which could exert the ultimate and compression strength of rebar, it could satisfy the requirements stipulated in the Chinese standard JGJ107, American standard UBC 1997, and other requirements in the relevant standards home and abroad;

Simple operation, fast splicing coupler;

Several types of splices, which could be suitable for rebar splicing when the rebar cage or the winding rebar is used;

High production efficiency, it only takes less than 1 minute to upset and thread one thread on the site;

High adaptability, the splicing could be conducted when the power is off, or under water, or at super high position, or windy, rainy and snowy weathers.

Environment-friendly, material-effective and economic.

Powered by CAT 3306B(C6121) engine, with ZF transmission. A good machine for road building work

Brief specification as following:

1.Overall dimension(Lx W x H): 9230*2800*3630 (mm)/ 10910*2890*3470 (with front dozer and rear ripper)

2.engine: Six cylinder,water cooled, four stroke, turbo-charge diesel engine Rated power:162kw/220ps

Rated revolution:2200rpm

Max. torque converter :840Nm at 1400rpm

3.Transmission: joint- venture ZF transmission, with torque converter, full power shift ,and 6 forward speeds and 3 reverse speeds, The max. speed is 38.98km/h, and speeds as follows:

speed/shaft: 1 2 3 4 5 6

forward 5.74 8.73 13.02 17.49 26.98 38.98

reverse 5.74 13.02 26.98

4. blade:

Length * chord:4422*688

cycling angle:360

Max. inkling angle left/right:90

Max. depth in ground:500mm

5.Tyres: standard tyres on all 6 wheels: 20.5-25,16PR

6.Electrical system:working voltage:24v, equipped with al kinds of instruments and working light.

7. operating weight: 19000kg (standard )and 21000kg with optional front dozer and rear ripper)

Optional:

1.front dozer:

width *height:2890*1020

to front axle distance:1600mm

Max. cutting depth in ground:205mm

2. rear ripper

ripper width:2087mm

teeth:5 pcs

Max. cutting depth in ground:315mm

The production line contains mainly the three major components: The materials, heating systems and the Joint Unit. In terms of different heating systems we divide the production line into two kinds, hot air type and conductive oil type. The annual capacity of the gypsum board production line is from 2Million to 20Million.

It has the features of low investment and consumption. It is easy to operate and has high performance-price ratio.

We have professional installation team installing and testing run equipments at your working site.

Completely Automatic Concrete Block Production Line includes:

Batching and Mixing system

Block Making Machine

Handling System

Cuber System

Control System