Beijing Construction Machinery - Page 2

Model YZ28G

Engine Model WD615.64G

Power(kw) 175

Ratio speed(rpm) 2200

Working Weight(kg) 28000

Front wheel working weight(kg) 18000

Rear wheel working weight(kg) 10000

Silence line weight(kg) 845

vibration wheel diameter(mm) 1522

Vibration wheel width(mm) 2130

Wheel base(mm) 3230

swing(mm) 1.8/0.95

Vibration frequency(HZ) 28/35

vibration power(KN) 430/320

Speed of each shaft(km/h)

I shaft 0-5

II shaft 0-9

Overall dimension(LxWxH) 5800x2500x3500

Maximum slop(%) 40

Turning angle:35

Minimum turning radii(mm) 5300

Minimum ground clearance(mm) 400

Maximum traction power(KN) 106.8

swing angle: 8

QTY9-18 Type Hydraulic Full-automatic Block Making Machine Line:

Equipment Superiority:

* Omnibearing vibration of table and mold improves the density of bricks. In order to get even transmission of vibration force, two-way mode is adopted in the lower vibration with two vibration tanks linked to each other by two hydraulic motors.

* The material feeder with a spiral reticulation structure distributes materials evenly, which shortens the operation time and then the mold cycling time.

* Due to its multi-function and advanced technology, it can be applied to produce various types of concrete blocks, standard bricks, perforated bricks and paving bricks. These products are of good quality, high compression strength and accurate dimension. Besides, more kinds can be produced such as color paving bricks, color grassland bricks and curb bricks if the secondary distributing device is added to the line.

* The main frame is wide for the convenience of mold filling, so more blocks can be made. In order to get even pressure, three oil reservoirs are used, which raise the pressure to as high as 100t. Moreover, the smallest reservoir in the middle increases the operating speed of the left and right ones respectively, thus improving the productivity.

* It is applicable to sand, stone chips, slag, coal dust, fly coal ash, furnace slag and construction waste, etc.

* This machine with an integration of mechanism, electronics and hydraulics is automatically controlled by the PLC computer, which supervises every phase through the whole course. Once fault is detected, the machine can lock itself. Meanwhile, output statistics is made by the computer. Thus, it holds a leading position for its outstanding performance in terms of environmental protection.

Production Scale:

1. Land area: 12, 000 m2, including * Workshop: 500 m2 * Warehouse: 800 m2

* Office: 100 m2

* Space: 10, 600 m2

2. Workers: 13 people

3. Water and power: * Water consumption: 12t per day * Power: 380V

* Total installed capacity: 85KW * Mean power: 50KW

Environmental protection: It conforms to the environmental protection standard with no waste water, slag and waste steam in the production process.

Attention: If you need the secend raw material feeding system, additional charges must be paid.

Technical Specifications

Items of Investment (USD(F. O. B. ):

QTY9-18 Block Making Machine 74, 550.00

Belt Conveyer 2, 500.00

JS750 Mixer 13, 550.00

Elevator/Lowerator 7, 700.00

Three-stage batching system(electronic calculation) 7, 900.00

Total 106, 200.00

We are an professional manufacturer for crane and electric hoist from China.

- Overhead Crane up to 500T capacity

- Gantry Crane: Upt to 500 capacity

- Jib

- Hoist: Up to 32 T capacity