China Additive - Page 31

Product name: Rimonabant

Chemical name: 5-(4-Chlorophenyl)-1-(2, 4-dichlorophenyl)-4-methyl-N-(1-piperidinyl)-1H-pyrazole-3-carboxamide

CAS NO: 158681-13-1

Chemical formula: C22H21N4OCl3

Structural formula:

Transformation nature: White-like to white crystalline powder, easily soluble in methanol.

Melting point: 230 -240

LOD: d0.5%

PH: (10% aqueous solution)4-7

Heavy metal: d10ppm

TLC: Only one stain

Assay: e99%

Main use:

A new type of medicine as a treatment of obesity and helps people to give up smoking.

Brief Introduction

ZB-175 ZB-101 is a polymer type of HMW multifunctional processing aid with property of external lubricant and promotion plastication. It is the substitute of traditional lubricant. It is white powder. It can be dissolved in ketone and chloroform, but not in wanter and alcohol.

Quality Specification

Item ZB-175 ZB-101

Inherent Viscosity [ ], 25c 0.5-1.5 0.5-1.5

Bulk Density, g/cm3 0.3-0.5 0.3-0.5

Volatile Matter,% 1.0 1.0

Particle Size 0.45mm (40 mesh) passed% 98 98

Property and Application

Item

Main Application

ZB-175: To be used in all kinds of rigid PVC products, such as sheet, pipe, pipe-fittings, window profile, etc. It is fit for all kinds of techniques, such as extrusion, calender, injection, etc.

ZB-101: To be used in all kinds of rigid PVC products, such as thin film, sheet, pipe, pipe-fitting, window profile, etc. It is fit for all kinds of techniques, such as blowing moulding, extrusion, calender, injection, etc.

Typical Characteristic

ZB-175LPolymer type of HMW external lubricant with part of process property; Excellent metal release; Good transparency; Prevent fade-out.

ZB-101: Good metal release on the basis of inherent transparency, Thus extend the running period of machine. No fade-out if excessive addition, so the difficulty of adjusting formulation is reduced compared with other external lubricant.

Corresponding Grade

Company Grade

Huaxing ZB-175 ZB-101

Rohm & Haas K-175

Kaneka PA-101

Mit.Rayon P-700 P-710

Compound stabilizer

Specialized for PVC Cable Compounds(C Series)

The series products combile the functions of heat stabilizer, light stabilizer, antioxidant and internal/external lubricant in one; And have the advantages of excellent heat, light and weather resistance, re-processibilty, good dispersibility, and convenient useage. Etc.

MEIDONG MD 650 is a liquid curing agent derived from cashew nutshell liquid.

APPLICATION:

This product is suitable for use in applications such as:

-marine and heavy duty

-general industrial coatings

-epoxy floor: Solvent based top

-adhesive

TYPICAL PROPERTIES:

ANALYSIS TYPICAL VALUES TEST METHODS

1. Viscosity (mPa*s, at 25C) 10000-40000 CS 107

2. Solids (%, 100-v. Loss) >95 CS 118

3. Gardner Color <16 CS 112

4. Amine Value (mg KOH/g) 270&plusmn;10 CS 113

5. Gel time (min, 50g, at 25C) 45-65 CS 115

6. Recommended PHR (EEW=500) 35&plusmn;5 -

ADVANTAGES:

-room temperature and low temperature cure

-moisture resistance during cure

-excellent chemical resistance, especially acids and alkalis

-excellent water/salt water resistance

-good flexibility

-low toxicity

-non-critical mix ratios

STORAGE / STABILITY:

Meidong MD series epoxy curing agents will absorb moisture and carbon dioxide when left in open containers. This may result in increased viscosity and some crystallization of the products. Therefore, all containers of these products should be kept tightly closed when not in use and stored in a cool and dry place. These products have a shelf life of 12 months when kept properly.

Ammonium bicarbonate Food grade

Specification:

Total alkali (as NH4HCO3): 99.2-101.0%

Chloride(as Cl): 0.003% max

Sulphate (as SO4): 0.007% max

As content: 0.0002% max

Ash: 0.008% max

Heavy metals (as Pb): 0.0005% max

Packing: 25kg/bag without pallets

Shipment: 25mt/FCL

Used as an aciduiant, flavorant and preservative in foods and beverages, it is also used as an antioxidant, plasticizer and detergent builder.

Product Name: Sodium Fosinopril

CAS NO.:88889-14-9

Standard: In-House

Waycome Pharmaceutical Co., Ltd. is a rising pharmaceutical company in China, engaging in research, development and manufacture of medical raw material, medical intermediates, pesticide and fine chemical.

QINGDAO JINKUNYUAN TRADES CO., LTD

THE SPECIFICATION OF CORN STARCH

ITEM SPECIFICATION

PROTEIN <0.35

MOISTURE <13 FAT <0.15

ASH <0.15 SO2 <30ppm

PH 5.4-6.4

WHITENESS >90

FINENESS >99.5 (100 mesh)

Viscosity: 6% slurry, heat to 90c, keep 1 hour, Brokfield 1 spindle

40CP

We produce choline chloride of high quality for more than 25 years. Of the top quality. For all these years we devoted our complete effort to this only product, which resulted in its incomparable reputation in many countries.

We can supply the best quality Tilmicosin in very competitive price.